Re: [PATCH v2 07/10] drm: rcar-du: Skip LVDS1 output on Gen3 when using dual-link LVDS mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



HI Laurent,

On Sun, May 12, 2019 at 12:06:59AM +0300, Laurent Pinchart wrote:
> In dual-link LVDS mode, the LVDS1 encoder is used as a companion for
> LVDS0, and both encoders transmit data from DU0. The LVDS1 output of DU1
> can't be used in that case, don't create an encoder and connector for
> it.
>
> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
> ---
>  drivers/gpu/drm/rcar-du/rcar_du_encoder.c | 12 ++++++++++++
>  drivers/gpu/drm/rcar-du/rcar_du_kms.c     |  2 +-
>  2 files changed, 13 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_encoder.c b/drivers/gpu/drm/rcar-du/rcar_du_encoder.c
> index 6c91753af7bc..fe046d194944 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_du_encoder.c
> +++ b/drivers/gpu/drm/rcar-du/rcar_du_encoder.c
> @@ -16,6 +16,7 @@
>  #include "rcar_du_drv.h"
>  #include "rcar_du_encoder.h"
>  #include "rcar_du_kms.h"
> +#include "rcar_lvds.h"
>
>  /* -----------------------------------------------------------------------------
>   * Encoder
> @@ -97,6 +98,17 @@ int rcar_du_encoder_init(struct rcar_du_device *rcdu,
>  		}
>  	}
>
> +	/*
> +	 * On Gen3 skip the LVDS1 output if the LVDS1 encoder is used as a
> +	 * companion for LVDS0 in dual-link mode.
> +	 */
> +	if (rcdu->info->gen >= 3 && output == RCAR_DU_OUTPUT_LVDS1) {
> +		if (bridge && rcar_lvds_dual_link(bridge)) {

If you get here, 'bridge' is guaranteed to be valid.

> +			ret = -ENOLINK;
> +			goto done;
> +		}
> +	}
> +
>  	ret = drm_encoder_init(rcdu->ddev, encoder, &encoder_funcs,
>  			       DRM_MODE_ENCODER_NONE, NULL);
>  	if (ret < 0)
> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_kms.c b/drivers/gpu/drm/rcar-du/rcar_du_kms.c
> index f8f7fff34dff..95c81e59e2f1 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_du_kms.c
> +++ b/drivers/gpu/drm/rcar-du/rcar_du_kms.c
> @@ -378,7 +378,7 @@ static int rcar_du_encoders_init_one(struct rcar_du_device *rcdu,
>  	}
>
>  	ret = rcar_du_encoder_init(rcdu, output, entity);
> -	if (ret && ret != -EPROBE_DEFER)
> +	if (ret && ret != -EPROBE_DEFER && ret != -ENOLINK)

Apart from the minor above
Reviewed-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>

Thanks
  j

>  		dev_warn(rcdu->dev,
>  			 "failed to initialize encoder %pOF on output %u (%d), skipping\n",
>  			 entity, output, ret);
> --
> Regards,
>
> Laurent Pinchart
>

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux