[PATCH 2/2] gpio: em: Return early on error in em_gio_probe()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



em_gio_probe() uses managed initializations for everything but creating
the IRQ domain.  Hence in most failure cases, no cleanup needs to be
performed at all.

Make this clearer for the casual reviewer by returning early, instead of
jumping to an out-of-sight label.

Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
 drivers/gpio/gpio-em.c | 28 +++++++++-------------------
 1 file changed, 9 insertions(+), 19 deletions(-)

diff --git a/drivers/gpio/gpio-em.c b/drivers/gpio/gpio-em.c
index 18937a9b1a14a72c..40f8c38bec1c24af 100644
--- a/drivers/gpio/gpio-em.c
+++ b/drivers/gpio/gpio-em.c
@@ -282,10 +282,8 @@ static int em_gio_probe(struct platform_device *pdev)
 	int ret;
 
 	p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
-	if (!p) {
-		ret = -ENOMEM;
-		goto err0;
-	}
+	if (!p)
+		return -ENOMEM;
 
 	p->pdev = pdev;
 	platform_set_drvdata(pdev, p);
@@ -298,28 +296,22 @@ static int em_gio_probe(struct platform_device *pdev)
 
 	if (!io[0] || !io[1] || !irq[0] || !irq[1]) {
 		dev_err(&pdev->dev, "missing IRQ or IOMEM\n");
-		ret = -EINVAL;
-		goto err0;
+		return -EINVAL;
 	}
 
 	p->base0 = devm_ioremap_nocache(&pdev->dev, io[0]->start,
 					resource_size(io[0]));
-	if (!p->base0) {
-		ret = -ENOMEM;
-		goto err0;
-	}
+	if (!p->base0)
+		return -ENOMEM;
 
 	p->base1 = devm_ioremap_nocache(&pdev->dev, io[1]->start,
 				   resource_size(io[1]));
-	if (!p->base1) {
-		ret = -ENOMEM;
-		goto err0;
-	}
+	if (!p->base1)
+		return -ENOMEM;
 
 	if (of_property_read_u32(pdev->dev.of_node, "ngpios", &ngpios)) {
 		dev_err(&pdev->dev, "Missing ngpios OF property\n");
-		ret = -EINVAL;
-		goto err0;
+		return -EINVAL;
 	}
 
 	gpio_chip = &p->gpio_chip;
@@ -349,9 +341,8 @@ static int em_gio_probe(struct platform_device *pdev)
 	p->irq_domain = irq_domain_add_simple(pdev->dev.of_node, ngpios, 0,
 					      &em_gio_irq_domain_ops, p);
 	if (!p->irq_domain) {
-		ret = -ENXIO;
 		dev_err(&pdev->dev, "cannot initialize irq domain\n");
-		goto err0;
+		return -ENXIO;
 	}
 
 	if (devm_request_irq(&pdev->dev, irq[0]->start,
@@ -378,7 +369,6 @@ static int em_gio_probe(struct platform_device *pdev)
 
 err1:
 	irq_domain_remove(p->irq_domain);
-err0:
 	return ret;
 }
 
-- 
2.17.1




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux