Re: [PATCH v2 11/15] usb: renesas_usbhs: Add support for RZ/A2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 2019-05-09 at 15:11 -0500, Chris Brandt wrote:
> The RZ/A2 is similar to the R-Car Gen3 with some small differences.
> 
> Signed-off-by: Chris Brandt <chris.brandt@xxxxxxxxxxx>
> ---
> v2:
>  * combined RZA1 and RZA2 for fifo setting
>  * added braces to make code easier to read
>  * fixed and clean up usbhs_rza2_power_ctrl()
> ---
>  drivers/usb/renesas_usbhs/Makefile |  2 +-
>  drivers/usb/renesas_usbhs/common.c | 12 +++++-
>  drivers/usb/renesas_usbhs/rza.h    |  1 +
>  drivers/usb/renesas_usbhs/rza2.c   | 79 ++++++++++++++++++++++++++++++++++++++
>  include/linux/usb/renesas_usbhs.h  |  1 +
>  5 files changed, 93 insertions(+), 2 deletions(-)
>  create mode 100644 drivers/usb/renesas_usbhs/rza2.c
> 
> diff --git a/drivers/usb/renesas_usbhs/Makefile b/drivers/usb/renesas_usbhs/Makefile
> index 5c5b51bb48ef..a1fed56b0957 100644
> --- a/drivers/usb/renesas_usbhs/Makefile
> +++ b/drivers/usb/renesas_usbhs/Makefile
> @@ -5,7 +5,7 @@
>  
>  obj-$(CONFIG_USB_RENESAS_USBHS)	+= renesas_usbhs.o
>  
> -renesas_usbhs-y			:= common.o mod.o pipe.o fifo.o rcar2.o rcar3.o rza.o
> +renesas_usbhs-y			:= common.o mod.o pipe.o fifo.o rcar2.o rcar3.o rza.o rza2.o
>  
>  ifneq ($(CONFIG_USB_RENESAS_USBHS_HCD),)
>  	renesas_usbhs-y		+= mod_host.o
> diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c
> index 820636fc4dc9..35d2298c03a0 100644
> --- a/drivers/usb/renesas_usbhs/common.c
> +++ b/drivers/usb/renesas_usbhs/common.c
> @@ -582,6 +582,10 @@ static const struct of_device_id usbhs_of_match[] = {
>  		.compatible = "renesas,rza1-usbhs",
>  		.data = (void *)USBHS_TYPE_RZA1,
>  	},
> +	{
> +		.compatible = "renesas,rza2-usbhs",
> +		.data = (void *)USBHS_TYPE_RZA2,
> +	},
>  	{ },
>  };
>  MODULE_DEVICE_TABLE(of, usbhs_of_match);
> @@ -614,7 +618,8 @@ static struct renesas_usbhs_platform_info *usbhs_parse_dt(struct device *dev)
>  		dparam->pipe_size = ARRAY_SIZE(usbhsc_new_pipe);
>  	}
>  
> -	if (dparam->type == USBHS_TYPE_RZA1) {
> +	if (dparam->type == USBHS_TYPE_RZA1 ||
> +	    dparam->type == USBHS_TYPE_RZA2) {
>  		dparam->pipe_configs = usbhsc_new_pipe;
>  		dparam->pipe_size = ARRAY_SIZE(usbhsc_new_pipe);
>  	}
> @@ -688,6 +693,11 @@ static int usbhs_probe(struct platform_device *pdev)
>  	case USBHS_TYPE_RZA1:
>  		priv->pfunc = usbhs_rza1_ops;
>  		break;
> +	case USBHS_TYPE_RZA2:
> +		priv->pfunc = usbhs_rza2_ops;
> +		usbhsc_flags_set(priv, USBHSF_HAS_CNEN);
> +		usbhsc_flags_set(priv, USBHSF_CFIFO_BYTE_ADDR);
> +		break;
>  	default:
>  		if (!info->platform_callback.get_id) {
>  			dev_err(&pdev->dev, "no platform callbacks");
> diff --git a/drivers/usb/renesas_usbhs/rza.h b/drivers/usb/renesas_usbhs/rza.h
> index ca917ca54f6d..073a53d1d442 100644
> --- a/drivers/usb/renesas_usbhs/rza.h
> +++ b/drivers/usb/renesas_usbhs/rza.h
> @@ -2,3 +2,4 @@
>  #include "common.h"
>  
>  extern const struct renesas_usbhs_platform_callback usbhs_rza1_ops;
> +extern const struct renesas_usbhs_platform_callback usbhs_rza2_ops;
> diff --git a/drivers/usb/renesas_usbhs/rza2.c b/drivers/usb/renesas_usbhs/rza2.c
> new file mode 100644
> index 000000000000..a1d9eb2d40cf
> --- /dev/null
> +++ b/drivers/usb/renesas_usbhs/rza2.c
> @@ -0,0 +1,79 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Renesas USB driver RZ/A2 initialization and power control
> + *
> + * Copyright (C) 2019 Chris Brandt
> + * Copyright (C) 2019 Renesas Electronics Corporation
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/of_device.h>
> +#include <linux/phy/phy.h>
> +#include "common.h"
> +#include "rza.h"
> +
> +
> +static int usbhs_rza2_hardware_init(struct platform_device *pdev)
> +{
> +	struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev);
> +
> +	if (IS_ENABLED(CONFIG_GENERIC_PHY)) {
no need check it, if it's not enabled, phy_get() will return an error
number.

> +		struct phy *phy = phy_get(&pdev->dev, "usb");
use devm_phy_get??
> +
> +		if (IS_ERR(phy))
> +			return PTR_ERR(phy);
> +
> +		priv->phy = phy;
> +		return 0;
> +	}
> +	return -ENXIO;
> +}
> +
> +static int usbhs_rza2_hardware_exit(struct platform_device *pdev)
> +{
> +	struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev);
> +
> +	if (priv->phy) {
> +		phy_put(priv->phy);
> +		priv->phy = NULL;
> +	}
> +
> +	return 0;
> +}
> +
> +static int usbhs_rza2_power_ctrl(struct platform_device *pdev,
> +				void __iomem *base, int enable)
> +{
> +	struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev);
> +	int retval = 0;
> +
> +	if (!priv->phy)
> +		return -ENODEV;
> +
> +	if (enable) {
> +		retval = phy_init(priv->phy);
> +		usbhs_bset(priv, SUSPMODE, SUSPM, SUSPM);
> +		udelay(100);	/* Wait for PLL to become stable */
> +		if (!retval)
> +			retval = phy_power_on(priv->phy);
> +	} else {
> +		usbhs_bset(priv, SUSPMODE, SUSPM, 0);
> +		phy_power_off(priv->phy);
> +		phy_exit(priv->phy);
> +	}
> +
> +	return retval;
> +}
> +
> +static int usbhs_rza2_get_id(struct platform_device *pdev)
> +{
> +	return USBHS_GADGET;
> +}
> +
> +const struct renesas_usbhs_platform_callback usbhs_rza2_ops = {
> +	.hardware_init = usbhs_rza2_hardware_init,
> +	.hardware_exit = usbhs_rza2_hardware_exit,
> +	.power_ctrl = usbhs_rza2_power_ctrl,
> +	.get_id = usbhs_rza2_get_id,
> +};
> diff --git a/include/linux/usb/renesas_usbhs.h b/include/linux/usb/renesas_usbhs.h
> index 53924f8e840c..39604c8b1eed 100644
> --- a/include/linux/usb/renesas_usbhs.h
> +++ b/include/linux/usb/renesas_usbhs.h
> @@ -196,6 +196,7 @@ struct renesas_usbhs_driver_param {
>  #define USBHS_TYPE_RCAR_GEN3		2
>  #define USBHS_TYPE_RCAR_GEN3_WITH_PLL	3
>  #define USBHS_TYPE_RZA1			4
> +#define USBHS_TYPE_RZA2			5
>  
>  /*
>   * option:





[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux