[PATCH v2 06/15] dt-bindings: rcar-gen3-phy-usb2: Document dr_mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Document the optional dr_mode property

Signed-off-by: Chris Brandt <chris.brandt@xxxxxxxxxxx>
---
 Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
index 79d8360d92e5..d2bbfe577345 100644
--- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
+++ b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
@@ -48,6 +48,9 @@ channel as USB OTG:
 	       regulator will be managed during the PHY power on/off sequence.
 - renesas,no-otg-pins: boolean, specify when a board does not provide proper
 		       otg pins.
+- dr_mode: string, indicates the working mode for the PHY. Can be "host",
+           "peripheral", or "otg". Should be set if otg controller is not used.
+
 
 Example (R-Car H3):
 
-- 
2.16.1




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux