Re: [PATCH 10/10] ARM: dts: r7s9210-rza2mevb: Add USB host support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, May 06, 2019 at 06:46:31PM -0500, Chris Brandt wrote:
> Enable USB Host support for both the Type-C connector on the CPU board
> and the Type-A plug on the sub board.
> 
> Both boards are also capable of USB Device operation as well after the
> appropriate Device Tree modifications.
> 
> Signed-off-by: Chris Brandt <chris.brandt@xxxxxxxxxxx>
> ---
>  arch/arm/boot/dts/r7s9210-rza2mevb.dts | 37 ++++++++++++++++++++++++++++++++++
>  1 file changed, 37 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/r7s9210-rza2mevb.dts b/arch/arm/boot/dts/r7s9210-rza2mevb.dts
> index 1eba37db7cdc..79d9d4b4779f 100644
> --- a/arch/arm/boot/dts/r7s9210-rza2mevb.dts
> +++ b/arch/arm/boot/dts/r7s9210-rza2mevb.dts
> @@ -100,6 +100,18 @@
>  		pinmux = <RZA2_PINMUX(PORT5, 4, 3)>,	/* SD1_CD */
>  			 <RZA2_PINMUX(PORT5, 5, 3)>;	/* SD1_WP */
>  	};
> +
> +	usb0_pins: usb0 {
> +		pinmux = <RZA2_PINMUX(PORT5, 2, 3)>,	/* VBUSIN0 */
> +			 <RZA2_PINMUX(PORTC, 6, 1)>,	/* VBUSEN0 */
> +			 <RZA2_PINMUX(PORTC, 7, 1)>;	/* OVRCUR0 */
> +	};
> +
> +	usb1_pins: usb1 {
> +		pinmux = <RZA2_PINMUX(PORTC, 0, 1)>,	/* VBUSIN1 */
> +			 <RZA2_PINMUX(PORTC, 5, 1)>,	/* VBUSEN1 */
> +			 <RZA2_PINMUX(PORT7, 5, 5)>;	/* OVRCUR1 */
> +	};
>  };
>  
>  /* High resolution System tick timers */
> @@ -154,3 +166,28 @@
>  	bus-width = <4>;
>  	status = "okay";
>  };
> +
> +/* USB-0 as Host */
> +/* NOTE: Requires JP3 to be fitted */
> +&usb2_phy0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&usb0_pins>;
> +	renesas,uses_usb_x1;
> +	dr_mode = "host";
> +	status = "okay";
> +};

Hi Chris,

Please add a space between the usb2_phy0 and ehci0 nodes.
Likewise below between the usb2_phy1 and ehci1 nodes.

Otherwise this patch looks good to me.

> +&ehci0 {
> +	status = "okay";
> +};
> +
> +/* USB-1 as Host */
> +&usb2_phy1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&usb1_pins>;
> +	renesas,uses_usb_x1;
> +	dr_mode = "host";
> +	status = "okay";
> +};
> +&ehci1 {
> +	status = "okay";
> +};
> -- 
> 2.16.1
> 



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux