[PATCH 0/6] Zap SCIF2 DMA configuration in R-Car Gen3 DTS

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This series is triggered by a regression on M3 targets caused by
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=703db5d1b175
("arm64: dts: renesas: r8a7796: Enable DMA for SCIF2"), when applied
on top of rcar-3.9.x Renesas official kernel.

This collection of patches attempts to consistently propagate the fix
across the existing R-Car3 DTS. Full story is placed into
commit ("Revert "arm64: dts: renesas: r8a7796: Enable DMA for SCIF2"").

While debugging drivers/tty/serial/sh-sci.c, a minor update avoiding
__ptrval__ in dev_dbg() is included here as well.

Tested using v5.1-rc7-131-gea9866793d1e on:
 - H3-ES2.0-ULCB
 - M3N-ES1.1-ULCB
 - M3-ES1.1-Salvator-XS

Eugeniu Rosca (6):
  serial: sh-sci: Reveal ptrval in dev_dbg
  Revert "arm64: dts: renesas: r8a7796: Enable DMA for SCIF2"
  arm64: dts: renesas: r8a7795: zap dma configuration in scif2
  Revert "arm64: dts: renesas: r8a77965: Enable DMA for SCIF2"
  Revert "arm64: dts: renesas: r8a77990: Enable DMA for SCIF2"
  Revert "arm64: dts: renesas: r8a77995: add DMA for SCIF2"

 arch/arm64/boot/dts/renesas/r8a7795.dtsi  | 3 ---
 arch/arm64/boot/dts/renesas/r8a7796.dtsi  | 3 ---
 arch/arm64/boot/dts/renesas/r8a77965.dtsi | 3 ---
 arch/arm64/boot/dts/renesas/r8a77990.dtsi | 4 +---
 arch/arm64/boot/dts/renesas/r8a77995.dtsi | 3 ---
 drivers/tty/serial/sh-sci.c               | 8 ++++----
 6 files changed, 5 insertions(+), 19 deletions(-)

-- 
2.21.0




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux