Re: [PATCH v2 0/5] Add TPU support for R-Car H3/M3-W/M3-N

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Thu, Apr 25, 2019 at 10:25:12AM +0900, Cao Van Dong wrote:
> This series adds tpu support for r8a7795/r8a7796/r8a77965 SoCs.
> Based on the renesas-drivers-2019-04-02-v5.1-rc3 tag of renesas-drivers tree.
> For test, after booting, I found the device was registered in the booting log.

Could you clarify some details of this test.

Looking at the DTS patches I see 'status = "disabled";' for each
of the newly added devices. So I would not expect them to be probed
at run-time without some extra tweaking.

> 
> Cao Van Dong (5):
>   clk: renesas: r8a779{5|6|65}: Add TPU clock
>   arm64: dts: renesas: r8a7795: Add TPU support
>   arm64: dts: renesas: r8a7796: Add TPU support
>   arm64: dts: renesas: r8a77965: Add TPU support
>   dt-bindings: pwm: renesas: tpu: Document R8A779{5|6|65} bindings
> 
>  Documentation/devicetree/bindings/pwm/renesas,tpu-pwm.txt |  3 +++
>  arch/arm64/boot/dts/renesas/r8a7795.dtsi                  | 11 +++++++++++
>  arch/arm64/boot/dts/renesas/r8a7796.dtsi                  | 11 +++++++++++
>  arch/arm64/boot/dts/renesas/r8a77965.dtsi                 | 11 +++++++++++
>  drivers/clk/renesas/r8a7795-cpg-mssr.c                    |  1 +
>  drivers/clk/renesas/r8a7796-cpg-mssr.c                    |  1 +
>  drivers/clk/renesas/r8a77965-cpg-mssr.c                   |  1 +
>  7 files changed, 39 insertions(+)
> 
> -- 
> 2.7.4
> 



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux