Re: [PATCH net-next v3] ravb: Avoid unsupported internal delay mode for R-Car E3/D3

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
Date: Tue, 23 Apr 2019 15:01:53 +0200

> According to the R-Car Gen3 Hardware Manual Rev 1.50 of Nov 30, 2018, the
> TX clock internal delay mode isn't supported on R-Car E3 (r8a77990) or D3
> (r8a77995). And by extension it is also not supported by RZ/G2E (r9a774c0).
> 
> This matches all ES versions of the affected SoCs as it is
> not clear if this problem will be resolved in newer chips.
> This can be revisited, as necessary.
> 
> This patch does not error-out if PHY_INTERFACE_MODE_RGMII_ID or
> PHY_INTERFACE_MODE_RGMII_TXID are used on SoCs where TX clock delay
> mode is not supported as there is a risk of introducing a regression
> when used in conjunction with older DT blobs present in the field.
> Rather, a warning is logged in such cases.
> 
> Based on work by Kazuya Mizuguchi.
> 
> Signed-off-by: Simon Horman <horms+renesas@xxxxxxxxxxxx>
> Reviewed-by: Andrew Lunn <andrew@xxxxxxx>

Applied, thanks Simon.



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux