RZ/G2E cat874 board is capable of detecting cable connect and disconnect
events. Add support for renesas_usb3 to receive connect and disconnect
events and support dual-role switch using usb-role-switch framework.
Signed-off-by: Biju Das <biju.das@xxxxxxxxxxxxxx>
---
V3-->V4
* No Change
V2-->V3
* Incorporated Shimoda-san's review comment
(https://patchwork.kernel.org/patch/10852507/)
* Used renesas,usb-role-switch property for differentiating USB
role switch associated with Type-C port controller driver.
V1-->V2
* Driver uses usb role clas for handling dual role switch and handling
connect/disconnect events instead of extcon.
---
drivers/usb/gadget/udc/renesas_usb3.c | 126 ++++++++++++++++++++++++++++------
1 file changed, 104 insertions(+), 22 deletions(-)
diff --git a/drivers/usb/gadget/udc/renesas_usb3.c b/drivers/usb/gadget/udc/renesas_usb3.c
index 7dc2485..efee047 100644
--- a/drivers/usb/gadget/udc/renesas_usb3.c
+++ b/drivers/usb/gadget/udc/renesas_usb3.c
@@ -351,6 +351,8 @@ struct renesas_usb3 {
int disabled_count;
struct usb_request *ep0_req;
+
+ enum usb_role connection_state;
u16 test_mode;
u8 ep0_buf[USB3_EP0_BUF_SIZE];
bool softconnect;
@@ -359,6 +361,7 @@ struct renesas_usb3 {
bool extcon_usb; /* check vbus and set EXTCON_USB */
bool forced_b_device;
bool start_to_connect;
+ bool usb_role_switch_property;
};
#define gadget_to_renesas_usb3(_gadget) \
@@ -644,22 +647,6 @@ static void usb3_disconnect(struct renesas_usb3 *usb3)
usb3->driver->disconnect(&usb3->gadget);
}
-static void usb3_check_vbus(struct renesas_usb3 *usb3)
-{
- if (usb3->workaround_for_vbus) {
- usb3_connect(usb3);
- } else {
- usb3->extcon_usb = !!(usb3_read(usb3, USB3_USB_STA) &
- USB_STA_VBUS_STA);
- if (usb3->extcon_usb)
- usb3_connect(usb3);
- else
- usb3_disconnect(usb3);
-
- schedule_work(&usb3->extcon_work);
- }
-}
-
static void renesas_usb3_role_work(struct work_struct *work)
{
struct renesas_usb3 *usb3 =
@@ -699,8 +686,11 @@ static void usb3_mode_config(struct renesas_usb3 *usb3, bool host, bool a_dev)
unsigned long flags;
spin_lock_irqsave(&usb3->lock, flags);
- usb3_set_mode_by_role_sw(usb3, host);
- usb3_vbus_out(usb3, a_dev);
+ if (!usb3->usb_role_switch_property ||
+ usb3->connection_state != USB_ROLE_NONE) {
+ usb3_set_mode_by_role_sw(usb3, host);
+ usb3_vbus_out(usb3, a_dev);
+ }
/* for A-Peripheral or forced B-device mode */
if ((!host && a_dev) || usb3->start_to_connect)
usb3_connect(usb3);
@@ -724,6 +714,28 @@ static void usb3_check_id(struct renesas_usb3 *usb3)
schedule_work(&usb3->extcon_work);
}
+static void usb3_check_vbus(struct renesas_usb3 *usb3)
+{
+ if (usb3->workaround_for_vbus) {
+ if (usb3->usb_role_switch_property) {
+ if (usb3->connection_state == USB_ROLE_DEVICE) {
+ usb3_mode_config(usb3, false, false);
+ usb3_connect(usb3);
+ }
+ } else
+ usb3_connect(usb3);
+ } else {
+ usb3->extcon_usb = !!(usb3_read(usb3, USB3_USB_STA) &
+ USB_STA_VBUS_STA);
+ if (usb3->extcon_usb)
+ usb3_connect(usb3);
+ else
+ usb3_disconnect(usb3);
+
+ schedule_work(&usb3->extcon_work);
+ }
+}
+
static void renesas_usb3_init_controller(struct renesas_usb3 *usb3)
{
usb3_init_axi_bridge(usb3);
@@ -2343,14 +2355,65 @@ static enum usb_role renesas_usb3_role_switch_get(struct device *dev)
return cur_role;
}
-static int renesas_usb3_role_switch_set(struct device *dev,
- enum usb_role role)
+static void handle_ext_role_switch_states(struct device *dev,
+ enum usb_role role)
+{
+ struct renesas_usb3 *usb3 = dev_get_drvdata(dev);
+ struct device *host = usb3->host_dev;
+ enum usb_role cur_role = renesas_usb3_role_switch_get(dev);
+
+ switch (role) {
+ case USB_ROLE_NONE:
+ usb3->connection_state = USB_ROLE_NONE;
+ if (usb3->driver)
+ usb3_disconnect(usb3);
+ usb3_vbus_out(usb3, false);
+ break;
+ case USB_ROLE_DEVICE:
+ if (usb3->connection_state == USB_ROLE_NONE) {
+ usb3->connection_state = USB_ROLE_DEVICE;
+ usb3_set_mode(usb3, false);
+ if (usb3->driver)
+ usb3_connect(usb3);
+ } else if (cur_role == USB_ROLE_HOST) {
+ device_release_driver(host);
+ usb3_set_mode(usb3, false);
+ if (usb3->driver)
+ usb3_connect(usb3);
+ }
+ usb3_vbus_out(usb3, false);
+ break;
+ case USB_ROLE_HOST:
+ if (usb3->connection_state == USB_ROLE_NONE) {
+ if (usb3->driver)
+ usb3_disconnect(usb3);
+
+ usb3->connection_state = USB_ROLE_HOST;
+ usb3_set_mode(usb3, true);
+ usb3_vbus_out(usb3, true);
+ if (device_attach(host) < 0)
+ dev_err(dev, "device_attach(host) failed\n");
+ } else if (cur_role == USB_ROLE_DEVICE) {
+ usb3_disconnect(usb3);
+ /* Must set the mode before device_attach of the host */
+ usb3_set_mode(usb3, true);
+ /* This device_attach() might sleep */
+ if (device_attach(host) < 0)
+ dev_err(dev, "device_attach(host) failed\n");
+ }
+ break;
+ default:
+ break;
+ }
+}
+
+static void handle_role_switch_states(struct device *dev,
+ enum usb_role role)
{
struct renesas_usb3 *usb3 = dev_get_drvdata(dev);
struct device *host = usb3->host_dev;
enum usb_role cur_role = renesas_usb3_role_switch_get(dev);
- pm_runtime_get_sync(dev);
if (cur_role == USB_ROLE_HOST && role == USB_ROLE_DEVICE) {
device_release_driver(host);
usb3_set_mode(usb3, false);
@@ -2361,6 +2424,20 @@ static int renesas_usb3_role_switch_set(struct device *dev,
if (device_attach(host) < 0)
dev_err(dev, "device_attach(host) failed\n");
}
+}
+
+static int renesas_usb3_role_switch_set(struct device *dev,
+ enum usb_role role)
+{
+ struct renesas_usb3 *usb3 = dev_get_drvdata(dev);
+
+ pm_runtime_get_sync(dev);
+
+ if (usb3->usb_role_switch_property)
+ handle_ext_role_switch_states(dev, role);
+ else
+ handle_role_switch_states(dev, role);
+
pm_runtime_put(dev);
return 0;
@@ -2650,7 +2727,7 @@ static const unsigned int renesas_usb3_cable[] = {
EXTCON_NONE,
};
-static const struct usb_role_switch_desc renesas_usb3_role_switch_desc = {
+static struct usb_role_switch_desc renesas_usb3_role_switch_desc = {
.set = renesas_usb3_role_switch_set,
.get = renesas_usb3_role_switch_get,
.allow_userspace_control = true,
@@ -2741,6 +2818,11 @@ static int renesas_usb3_probe(struct platform_device *pdev)
if (ret < 0)
goto err_dev_create;
+ if (device_property_read_bool(&pdev->dev, "renesas,usb-role-switch")) {
+ usb3->usb_role_switch_property = true;
+ renesas_usb3_role_switch_desc.fwnode = dev_fwnode(&pdev->dev);
+ }
+
INIT_WORK(&usb3->role_work, renesas_usb3_role_work);
usb3->role_sw = usb_role_switch_register(&pdev->dev,
&renesas_usb3_role_switch_desc);
--
2.7.4
