Re: [PATCH v2 09/20] ARM: dts: r8a77470: Add VSP support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Apr 11, 2019 at 04:54:11PM +0900, Cao Van Dong wrote:
> Add vsp nodes to dtsi for VSP support on the RZ/G1C (r8a77470) SoC.
> 
> Signed-off-by: Cao Van Dong <cv-dong@xxxxxxxxxxx>
> ---
>  arch/arm/boot/dts/r8a77470.dtsi | 18 ++++++++++++++++++
>  1 file changed, 18 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/r8a77470.dtsi b/arch/arm/boot/dts/r8a77470.dtsi
> index ae1dba0..2540bca 100644
> --- a/arch/arm/boot/dts/r8a77470.dtsi
> +++ b/arch/arm/boot/dts/r8a77470.dtsi
> @@ -1113,6 +1113,24 @@
>  			status = "disabled";
>  		};
>  
> +		vsp@fe928000 {
> +			compatible = "renesas,vsp1";
> +			reg = <0 0xfe928000 0 0x8000>;
> +			interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cpg CPG_MOD 131>;
> +			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
> +			resets = <&cpg 131>;
> +		};
> +
> +		vsp@fe930000 {
> +			compatible = "renesas,vsp1";
> +			reg = <0 0xfe930000 0 0x8000>;
> +			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cpg CPG_MOD 128>;
> +			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
> +			resets = <&cpg 128>;
> +		};
> +

Nodes should be sorted by
1. Bus address
2. IP block tupe

So the above vsp nodes should go after sd@ee100000.

Otherwise this patch looks good to me.

>  		sdhi0: sd@ee100000 {
>  			compatible = "renesas,sdhi-r8a77470",
>  				     "renesas,rcar-gen2-sdhi";
> -- 
> 2.7.4
> 



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux