Re: [PATCH v3 1/2] dmaengine: sh: rcar-dmac: With cyclic DMA residue 0 is valid

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Dirk,

Thank you for the patch.

On Fri, Apr 12, 2019 at 07:29:13AM +0200, Dirk Behme wrote:
> Having a cyclic DMA, a residue 0 is not an indication of a completed
> DMA. In case of cyclic DMA make sure that dma_set_residue() is called
> and with this a residue of 0 is forwarded correctly to the caller.
> 
> Fixes: 3544d2878817 ("dmaengine: rcar-dmac: use result of updated get_residue in tx_status")
> Signed-off-by: Dirk Behme <dirk.behme@xxxxxxxxxxxx>
> Signed-off-by: Achim Dahlhoff <Achim.Dahlhoff@xxxxxxxxxxxx>
> Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@xxxxxxxxxxx>
> Signed-off-by: Yao Lihua <ylhuajnu@xxxxxxxxxxx>
> Cc: <stable@xxxxxxxxxxxxxxx> # v4.8+

Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>

> ---
> Note: Patch done against mainline v5.0
> 
> Changes in v2: None
> 
> Changes in v3: Move reading rchan into the spin lock protection.
> 
>  drivers/dma/sh/rcar-dmac.c | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/dma/sh/rcar-dmac.c b/drivers/dma/sh/rcar-dmac.c
> index 2b4f25698169..54810ffd95e2 100644
> --- a/drivers/dma/sh/rcar-dmac.c
> +++ b/drivers/dma/sh/rcar-dmac.c
> @@ -1368,6 +1368,7 @@ static enum dma_status rcar_dmac_tx_status(struct dma_chan *chan,
>  	enum dma_status status;
>  	unsigned long flags;
>  	unsigned int residue;
> +	bool cyclic;
>  
>  	status = dma_cookie_status(chan, cookie, txstate);
>  	if (status == DMA_COMPLETE || !txstate)
> @@ -1375,10 +1376,11 @@ static enum dma_status rcar_dmac_tx_status(struct dma_chan *chan,
>  
>  	spin_lock_irqsave(&rchan->lock, flags);
>  	residue = rcar_dmac_chan_get_residue(rchan, cookie);
> +	cyclic = rchan->desc.running ? rchan->desc.running->cyclic : false;
>  	spin_unlock_irqrestore(&rchan->lock, flags);
>  
>  	/* if there's no residue, the cookie is complete */
> -	if (!residue)
> +	if (!residue && !cyclic)
>  		return DMA_COMPLETE;
>  
>  	dma_set_residue(txstate, residue);

-- 
Regards,

Laurent Pinchart



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux