RE: [PATCH V5 04/13] phy: rcar-gen3-usb2: Add support for r8a77470

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Biju-san,

> From: Biju Das, Sent: Wednesday, April 10, 2019 11:49 PM
> 
> This patch adds support for r8a77470 (RZ/G1C). We can reuse this driver for
> initializing timing/interrupt generation registers.
> 
> Signed-off-by: Biju Das <biju.das@xxxxxxxxxxxxxx>
> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
> ---

Thank you for the patch! I tested this patch on r8a77965-salvator-xs
and I didn't find any regressions. So,

Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>

Best regards,
Yoshihiro Shimoda

> V4-->V5
>  * Incorporated Kishan and Shimoda-san's review comment
>   https://patchwork.kernel.org/patch/10893387/
> V3-->V4
>  * Incorporated Kishan and Shimoda-san's review comment
>   https://patchwork.kernel.org/patch/10883265/
> V2-->V3
>  * Incorporated shimoda-san's review comment
>  Ref: https://patchwork.kernel.org/patch/10655855/
> ---
>  drivers/phy/renesas/Kconfig              |  2 +-
>  drivers/phy/renesas/phy-rcar-gen3-usb2.c | 39 +++++++++++++++++++++++++++-----
>  2 files changed, 34 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/phy/renesas/Kconfig b/drivers/phy/renesas/Kconfig
> index e340a92..111bdca 100644
> --- a/drivers/phy/renesas/Kconfig
> +++ b/drivers/phy/renesas/Kconfig
> @@ -19,7 +19,7 @@ config PHY_RCAR_GEN3_PCIE
>  config PHY_RCAR_GEN3_USB2
>  	tristate "Renesas R-Car generation 3 USB 2.0 PHY driver"
>  	depends on ARCH_RENESAS
> -	depends on EXTCON
> +	depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in
>  	depends on USB_SUPPORT
>  	select GENERIC_PHY
>  	select USB_COMMON
> diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
> index 0a34782..e3a88b9 100644
> --- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c
> +++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
> @@ -393,6 +393,12 @@ static const struct phy_ops rcar_gen3_phy_usb2_ops = {
>  	.owner		= THIS_MODULE,
>  };
> 
> +static const struct phy_ops rz_g1c_phy_usb2_ops = {
> +	.init		= rcar_gen3_phy_usb2_init,
> +	.exit		= rcar_gen3_phy_usb2_exit,
> +	.owner		= THIS_MODULE,
> +};
> +
>  static irqreturn_t rcar_gen3_phy_usb2_irq(int irq, void *_ch)
>  {
>  	struct rcar_gen3_chan *ch = _ch;
> @@ -411,11 +417,27 @@ static irqreturn_t rcar_gen3_phy_usb2_irq(int irq, void *_ch)
>  }
> 
>  static const struct of_device_id rcar_gen3_phy_usb2_match_table[] = {
> -	{ .compatible = "renesas,usb2-phy-r8a7795" },
> -	{ .compatible = "renesas,usb2-phy-r8a7796" },
> -	{ .compatible = "renesas,usb2-phy-r8a77965" },
> -	{ .compatible = "renesas,rcar-gen3-usb2-phy" },
> -	{ }
> +	{
> +		.compatible = "renesas,usb2-phy-r8a77470",
> +		.data = &rz_g1c_phy_usb2_ops,
> +	},
> +	{
> +		.compatible = "renesas,usb2-phy-r8a7795",
> +		.data = &rcar_gen3_phy_usb2_ops,
> +	},
> +	{
> +		.compatible = "renesas,usb2-phy-r8a7796",
> +		.data = &rcar_gen3_phy_usb2_ops,
> +	},
> +	{
> +		.compatible = "renesas,usb2-phy-r8a77965",
> +		.data = &rcar_gen3_phy_usb2_ops,
> +	},
> +	{
> +		.compatible = "renesas,rcar-gen3-usb2-phy",
> +		.data = &rcar_gen3_phy_usb2_ops,
> +	},
> +	{ /* sentinel */ },
>  };
>  MODULE_DEVICE_TABLE(of, rcar_gen3_phy_usb2_match_table);
> 
> @@ -431,6 +453,7 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
>  	struct rcar_gen3_chan *channel;
>  	struct phy_provider *provider;
>  	struct resource *res;
> +	const struct phy_ops *phy_usb2_ops;
>  	int irq, ret = 0;
> 
>  	if (!dev->of_node) {
> @@ -481,7 +504,11 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
>  	 * And then, phy-core will manage runtime pm for this device.
>  	 */
>  	pm_runtime_enable(dev);
> -	channel->phy = devm_phy_create(dev, NULL, &rcar_gen3_phy_usb2_ops);
> +	phy_usb2_ops = of_device_get_match_data(dev);
> +	if (!phy_usb2_ops)
> +		return -EINVAL;
> +
> +	channel->phy = devm_phy_create(dev, NULL, phy_usb2_ops);
>  	if (IS_ERR(channel->phy)) {
>  		dev_err(dev, "Failed to create USB2 PHY\n");
>  		ret = PTR_ERR(channel->phy);
> --
> 2.7.4





[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux