[PATCH V4 09/13] ARM: dts: iwg23s-sbc: Enable USB Phy[01]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Enable USB phy[01] on iWave iwg23s sbc based on RZ/G1C SoC.

Signed-off-by: Biju Das <biju.das@xxxxxxxxxxxxxx>
Reviewed-by: Simon Horman <horms+renesas@xxxxxxxxxxxx>
---
V3-->V4
 * No change
V2-->V3
 * Added gen3 usb2 phy nodes
V1-->V2
 * No change
---
 arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts | 32 +++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
index 9f9eb15..7ae7ee1 100644
--- a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
+++ b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
@@ -214,6 +214,16 @@
 		function = "sdhi2";
 		power-source = <1800>;
 	};
+
+	usb0_pins: usb0 {
+		groups = "usb0";
+		function = "usb0";
+	};
+
+	usb1_pins: usb1 {
+		groups = "usb1";
+		function = "usb1";
+	};
 };
 
 &qspi0 {
@@ -274,3 +284,25 @@
 	sd-uhs-sdr50;
 	status = "okay";
 };
+
+&usb2_phy0 {
+	status = "okay";
+};
+
+&usb2_phy1 {
+	status = "okay";
+};
+
+&usbphy0 {
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&usbphy1 {
+	pinctrl-0 = <&usb1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
-- 
2.7.4




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux