Hello!
On 03/29/2019 11:20 AM, Mason Yang wrote:
> Document the bindings used by the Renesas R-Car Gen3 RPC-IF MFD controller.
>
> Signed-off-by: Mason Yang <masonccyang@xxxxxxxxxxx>
> ---
> .../devicetree/bindings/mfd/mfd-renesas-rpc.txt | 57 ++++++++++++++++++++++
> 1 file changed, 57 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mfd/mfd-renesas-rpc.txt
>
> diff --git a/Documentation/devicetree/bindings/mfd/mfd-renesas-rpc.txt b/Documentation/devicetree/bindings/mfd/mfd-renesas-rpc.txt
> new file mode 100644
> index 0000000..577986b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/mfd-renesas-rpc.txt
> @@ -0,0 +1,57 @@
> +Renesas R-Car Gen3 RPC-IF MFD controller Device Tree Bindings
> +---------------------------------------------------------------------
Too many dashes. :-)
> +
> +Required properties:
> +- compatible: should be an SoC-specific compatible value, followed by
> + "renesas,rcar-gen3-rpc" as a fallback.
> + supported SoC-specific values are:
> + "renesas,r8a77995-rpc" (R-Car D3)
> +- reg: should contain three register areas:
> + first for the base address of rpc-if registers,
> + second for the direct mapping read mode and
> + third for the write buffer area.
> +- reg-names: should contain "regs", "dirmap" and "wbuf"
> +- clocks: should contain 1 entries for the module's clock
> +- clock-names: should contain "rpc"
What about the "power-domains" and "resets" props?
> +- #address-cells: should be 1
> +- #size-cells: should be 0
Why? You don't have the "reg" props in the sub-devices...
> +
> +Required nodes:
> + spi:
> + Node for configuring the SPI controller driver.
> + Required properties:
> + compatible = "renesas,rcar-rpc-spi";
Sigh... you were supposed to only place the flash device sub-nodes
under the "main" device node, we don't add the virtual devices to DT,
there's no matching sub-device in the hardware. You don't have to
describe these sub-devices in DT, you can register the simple platform
devices.
> +
> + hf:
> + Node for configuring the hyperflash controller driver.
> + Required properties:
> + compatible = "renesas,rcar-rpc-hf";
> +
> +Example:
> +
> + rpc_mfd: rpc-mfd@ee200000 {
Just "rpc: rpc-if@ee200000, please.
[...]
MBR, Sergei
