[PATCH] clk: renesas: rcar-gen3: Fix cpg_sd_clock_round_rate() return value

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Takeshi Kihara <takeshi.kihara.df@xxxxxxxxxxx>

cpg_sd_clock_round_rate() may return an unsupported clock rate for the
requested clock rate. Therefore, when cpg_sd_clock_set_rate() sets the
clock rate acquired by cpg_sd_clock_round_rate(), an error may occur.

This is not conform the clk API design.

This patch fixes that by making sure cpg_sd_clock_calc_div() considers
only the division values defined in cpg_sd_div_table[].
With this fix, the cpg_sd_clock_round_rate() always return a support
clock rate.

Signed-off-by: Takeshi Kihara <takeshi.kihara.df@xxxxxxxxxxx>
Fixes: 90c073e53909da85 ("clk: shmobile: r8a7795: Add SD divider support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
To be queued in clk-renesas-for-v5.2.

 drivers/clk/renesas/rcar-gen3-cpg.c | 28 +++++++++++++---------------
 1 file changed, 13 insertions(+), 15 deletions(-)

diff --git a/drivers/clk/renesas/rcar-gen3-cpg.c b/drivers/clk/renesas/rcar-gen3-cpg.c
index d5fb768b089ff1c1..d2745c57207efc01 100644
--- a/drivers/clk/renesas/rcar-gen3-cpg.c
+++ b/drivers/clk/renesas/rcar-gen3-cpg.c
@@ -3,6 +3,7 @@
  * R-Car Gen3 Clock Pulse Generator
  *
  * Copyright (C) 2015-2018 Glider bvba
+ * Copyright (C) 2019 Renesas Electronics Corp.
  *
  * Based on clk-rcar-gen3.c
  *
@@ -236,8 +237,6 @@ struct sd_clock {
 	const struct sd_div_table *div_table;
 	struct cpg_simple_notifier csn;
 	unsigned int div_num;
-	unsigned int div_min;
-	unsigned int div_max;
 	unsigned int cur_div_idx;
 };
 
@@ -314,14 +313,20 @@ static unsigned int cpg_sd_clock_calc_div(struct sd_clock *clock,
 					  unsigned long rate,
 					  unsigned long parent_rate)
 {
-	unsigned int div;
-
-	if (!rate)
-		rate = 1;
+	unsigned long calc_rate, best_rate = 0, diff, diff_min = ULONG_MAX;
+	unsigned int i;
 
-	div = DIV_ROUND_CLOSEST(parent_rate, rate);
+	for (i = 0; i < clock->div_num; i++) {
+		calc_rate = DIV_ROUND_CLOSEST(parent_rate,
+					      clock->div_table[i].div);
+		diff = calc_rate > rate ? calc_rate - rate : rate - calc_rate;
+		if (diff <= diff_min) {
+			best_rate = calc_rate;
+			diff_min = diff;
+		}
+	}
 
-	return clamp_t(unsigned int, div, clock->div_min, clock->div_max);
+	return DIV_ROUND_CLOSEST(parent_rate, best_rate);
 }
 
 static long cpg_sd_clock_round_rate(struct clk_hw *hw, unsigned long rate,
@@ -405,13 +410,6 @@ static struct clk * __init cpg_sd_clk_register(const char *name,
 	val |= CPG_SD_STP_MASK | (clock->div_table[0].val & CPG_SD_FC_MASK);
 	writel(val, clock->csn.reg);
 
-	clock->div_max = clock->div_table[0].div;
-	clock->div_min = clock->div_max;
-	for (i = 1; i < clock->div_num; i++) {
-		clock->div_max = max(clock->div_max, clock->div_table[i].div);
-		clock->div_min = min(clock->div_min, clock->div_table[i].div);
-	}
-
 	clk = clk_register(NULL, &clock->hw);
 	if (IS_ERR(clk))
 		goto free_clock;
-- 
2.17.1




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux