Re: [PATCH V2] PCI: rcar: Add the initialization of PCIe link in resume_noirq

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, Feb 17, 2019 at 02:24:41PM +0100, marek.vasut@xxxxxxxxx wrote:
> From: Kazufumi Ikeda <kaz-ikeda@xxxxxxxxxxxxx>
> 
> Reestablish the PCIe link very early in the resume process in case it
> went down to prevent PCI accesses from hanging the bus. Such accesses
> can happen early in the PCI resume process, in the resume_noirq, thus
> the link must be reestablished in the resume_noirq callback of the
> driver.
> 
> Signed-off-by: Kazufumi Ikeda <kaz-ikeda@xxxxxxxxxxxxx>
> Signed-off-by: Gaku Inami <gaku.inami.xw@xxxxxxxxxxxxxx>
> Signed-off-by: Marek Vasut <marek.vasut+renesas@xxxxxxxxx>
> Cc: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
> Cc: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
> Cc: Simon Horman <horms+renesas@xxxxxxxxxxxx>
> Cc: Wolfram Sang <wsa@xxxxxxxxxxxxx>
> Cc: linux-renesas-soc@xxxxxxxxxxxxxxx
> ---
> V2: - Use BIT() macro for (1 << n)
>     - Since polling in rcar_pcie_wait_for_dl() uses udelay(), do not
>       add extra changes to this function anymore
>     - Make resume_noirq return early and clean up parenthesis therein
> ---
>  drivers/pci/controller/pcie-rcar.c | 20 ++++++++++++++++++++
>  1 file changed, 20 insertions(+)

I applied it to pci/controller-fixes but the kbot barfed at it so we
need to rework it.

Thanks,
Lorenzo

> diff --git a/drivers/pci/controller/pcie-rcar.c b/drivers/pci/controller/pcie-rcar.c
> index c8febb009454..b8f8fb3bc640 100644
> --- a/drivers/pci/controller/pcie-rcar.c
> +++ b/drivers/pci/controller/pcie-rcar.c
> @@ -46,6 +46,7 @@
>  
>  /* Transfer control */
>  #define PCIETCTLR		0x02000
> +#define  DL_DOWN		BIT(3)
>  #define  CFINIT			1
>  #define PCIETSTR		0x02004
>  #define  DATA_LINK_ACTIVE	1
> @@ -1130,6 +1131,7 @@ static int rcar_pcie_probe(struct platform_device *pdev)
>  	pcie = pci_host_bridge_priv(bridge);
>  
>  	pcie->dev = dev;
> +	platform_set_drvdata(pdev, pcie);
>  
>  	err = pci_parse_request_of_pci_ranges(dev, &pcie->resources, NULL);
>  	if (err)
> @@ -1221,10 +1223,28 @@ static int rcar_pcie_probe(struct platform_device *pdev)
>  	return err;
>  }
>  
> +static int rcar_pcie_resume_noirq(struct device *dev)
> +{
> +	struct rcar_pcie *pcie = dev_get_drvdata(dev);
> +
> +	if (rcar_pci_read_reg(pcie, PMSR) &&
> +	    !(rcar_pci_read_reg(pcie, PCIETCTLR) & DL_DOWN))
> +		return 0;
> +
> +	/* Re-establish the PCIe link */
> +	rcar_pci_write_reg(pcie, CFINIT, PCIETCTLR);
> +	return rcar_pcie_wait_for_dl(pcie);
> +}
> +
> +static const struct dev_pm_ops rcar_pcie_pm_ops = {
> +	.resume_noirq = rcar_pcie_resume_noirq,
> +};
> +
>  static struct platform_driver rcar_pcie_driver = {
>  	.driver = {
>  		.name = "rcar-pcie",
>  		.of_match_table = rcar_pcie_of_match,
> +		.pm = &rcar_pcie_pm_ops,
>  		.suppress_bind_attrs = true,
>  	},
>  	.probe = rcar_pcie_probe,
> -- 
> 2.19.2
> 



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux