[PATCH V4 3/6] PCI: rcar: Replace various variable types with unsigned ones for register values

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Marek Vasut <marek.vasut+renesas@xxxxxxxxx>

Replace various variable types with u32 or unsigned int type for
variables holding register values, since the registers are 32bit.
Note that rcar_pcie_msi_irq() still uses various variable types
because both find_first_bit() and __fls() require various variable
types as an argument.

Signed-off-by: Marek Vasut <marek.vasut+renesas@xxxxxxxxx>
Cc: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Cc: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
Cc: Simon Horman <horms+renesas@xxxxxxxxxxxx>
Cc: Wolfram Sang <wsa@xxxxxxxxxxxxx>
Cc: linux-renesas-soc@xxxxxxxxxxxxxxx
To: linux-pci@xxxxxxxxxxxxxxx
Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
V2: - s@unsigned long@various variable types@ in the commit message
    - Replace int with unsigned int for the $shift variable
    - Replace int with unsigned int / u32 in rcar_pcie_config_access()
V3: - Change shift from u32 to unsigned int
    - Change addr and data in phy_write_reg() from unsigned int to u32
V4: - Change reg to unsigned int in rcar_pcie_config_access()
---
 drivers/pci/controller/pcie-rcar.c | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/drivers/pci/controller/pcie-rcar.c b/drivers/pci/controller/pcie-rcar.c
index 3db693b4410e..6699211fdc9a 100644
--- a/drivers/pci/controller/pcie-rcar.c
+++ b/drivers/pci/controller/pcie-rcar.c
@@ -170,7 +170,7 @@ enum {
 
 static void rcar_rmw32(struct rcar_pcie *pcie, int where, u32 mask, u32 data)
 {
-	int shift = 8 * (where & 3);
+	unsigned int shift = 8 * (where & 3);
 	u32 val = rcar_pci_read_reg(pcie, where & ~3);
 
 	val &= ~(mask << shift);
@@ -180,7 +180,7 @@ static void rcar_rmw32(struct rcar_pcie *pcie, int where, u32 mask, u32 data)
 
 static u32 rcar_read_conf(struct rcar_pcie *pcie, int where)
 {
-	int shift = 8 * (where & 3);
+	unsigned int shift = 8 * (where & 3);
 	u32 val = rcar_pci_read_reg(pcie, where & ~3);
 
 	return val >> shift;
@@ -191,7 +191,7 @@ static int rcar_pcie_config_access(struct rcar_pcie *pcie,
 		unsigned char access_type, struct pci_bus *bus,
 		unsigned int devfn, int where, u32 *data)
 {
-	int dev, func, reg, index;
+	unsigned int dev, func, reg, index;
 
 	dev = PCI_SLOT(devfn);
 	func = PCI_FUNC(devfn);
@@ -295,8 +295,9 @@ static int rcar_pcie_write_conf(struct pci_bus *bus, unsigned int devfn,
 				int where, int size, u32 val)
 {
 	struct rcar_pcie *pcie = bus->sysdata;
-	int shift, ret;
+	unsigned int shift;
 	u32 data;
+	int ret;
 
 	ret = rcar_pcie_config_access(pcie, RCAR_PCI_ACCESS_READ,
 				      bus, devfn, where, &data);
@@ -506,10 +507,10 @@ static int phy_wait_for_ack(struct rcar_pcie *pcie)
 }
 
 static void phy_write_reg(struct rcar_pcie *pcie,
-				 unsigned int rate, unsigned int addr,
-				 unsigned int lane, unsigned int data)
+			  unsigned int rate, u32 addr,
+			  unsigned int lane, u32 data)
 {
-	unsigned long phyaddr;
+	u32 phyaddr;
 
 	phyaddr = WRITE_CMD |
 		((rate & 1) << RATE_POS) |
@@ -1117,7 +1118,7 @@ static int rcar_pcie_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct rcar_pcie *pcie;
-	unsigned int data;
+	u32 data;
 	int err;
 	int (*phy_init_fn)(struct rcar_pcie *);
 	struct pci_host_bridge *bridge;
-- 
2.20.1




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux