Hello!
On 01/28/2019 09:49 AM, Mason Yang wrote:
> Add a driver for Renesas R-Car Gen3 RPC-IF SPI controller.
>
> Signed-off-by: Mason Yang <masonccyang@xxxxxxxxxxx>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
I've just found an error due to which my flash couldn't be read.
[...]
> diff --git a/drivers/spi/spi-renesas-rpc.c b/drivers/spi/spi-renesas-rpc.c
> new file mode 100644
> index 0000000..ea12017
> --- /dev/null
> +++ b/drivers/spi/spi-renesas-rpc.c
> @@ -0,0 +1,804 @@
[...]
> +static void rpc_spi_mem_set_prep_op_cfg(struct spi_device *spi,
> + const struct spi_mem_op *op,
> + u64 *offs, size_t *len)
> +{
> + struct rpc_spi *rpc = spi_controller_get_devdata(spi->controller);
> + if (op->dummy.nbytes) {
> + rpc->smenr |= RPC_SMENR_DME;
> + rpc->dummy = RPC_SMDMCR_DMCYC(op->dummy.nbytes);
SMDMCR.DMCYC is in bits -- you forgot to multiply by 8.
> + rpc->totalxferlen += op->dummy.nbytes;
> + }[...]
> +static void rpc_spi_transfer_setup(struct rpc_spi *rpc,
> + struct spi_message *msg)
> +{
> + struct spi_transfer *t, xfer[4] = { };
> + u32 i, xfercnt, xferpos = 0;
[...]
> + if (xfercnt > 3 && xfer[2].len && xfer[2].tx_buf) {
> + rpc->smenr |= RPC_SMENR_DME;
> + rpc->dummy = RPC_SMDMCR_DMCYC(xfer[2].len);
Here as well, I guess.
[...]
MBR, Sergei
