Enable and connect the second LVDS encoder to the second LVDS input of
the THC63LVD1024 for dual-link LVDS operation. This requires changing
the default settings of SW45 and SW47 to OFF and ON respectively.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
---
.../arm64/boot/dts/renesas/r8a77990-ebisu.dts | 21 +++++++++++++++++--
1 file changed, 19 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
index 62bdddcbbae7..4b9f3305b666 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
@@ -83,11 +83,18 @@
port@0 {
reg = <0>;
- thc63lvd1024_in: endpoint {
+ thc63lvd1024_in0: endpoint {
remote-endpoint = <&lvds0_out>;
};
};
+ port@1 {
+ reg = <1>;
+ thc63lvd1024_in1: endpoint {
+ remote-endpoint = <&lvds1_out>;
+ };
+ };
+
port@2 {
reg = <2>;
thc63lvd1024_out: endpoint {
@@ -436,17 +443,27 @@
ports {
port@1 {
lvds0_out: endpoint {
- remote-endpoint = <&thc63lvd1024_in>;
+ remote-endpoint = <&thc63lvd1024_in0>;
};
};
};
};
&lvds1 {
+ status = "okay";
+
clocks = <&cpg CPG_MOD 727>,
<&x13_clk>,
<&extal_clk>;
clock-names = "fck", "dclkin.0", "extal";
+
+ ports {
+ port@1 {
+ lvds1_out: endpoint {
+ remote-endpoint = <&thc63lvd1024_in1>;
+ };
+ };
+ };
};
&ohci0 {
--
Regards,
Laurent Pinchart
