Hi Alexandre, > -----Original Message----- > From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx> > Sent: 02 March 2019 21:08 > To: Biju Das <biju.das@xxxxxxxxxxxxxx> > Cc: Alessandro Zummo <a.zummo@xxxxxxxxxxxx>; Rob Herring > <robh+dt@xxxxxxxxxx>; Mark Rutland <mark.rutland@xxxxxxx>; linux- > rtc@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; Simon Horman > <horms@xxxxxxxxxxxx>; Geert Uytterhoeven <geert+renesas@xxxxxxxxx>; > Chris Paterson <Chris.Paterson2@xxxxxxxxxxx>; Fabrizio Castro > <fabrizio.castro@xxxxxxxxxxxxxx>; linux-renesas-soc@xxxxxxxxxxxxxxx > Subject: Re: [PATCH 0/5] Add EPSON RX-8571 RTC support > > On 21/02/2019 09:40:43+0000, Biju Das wrote: > > This patch set aims to add support for EPSON RX-8571 real-time clock. > > EPSON RX-8571 rtc is compatible with EPSON RX-8581 rtc except that > > former has 16 bytes additional RAM. > > > > 1 byte of nvmem is supported on both RX-8581 and RX-8571. It is > > exposed through sysfs along with support for 16 bytes additional RAM > > present only on EPSON RX-8571. > > > > This patch series is tested against renesas-dev and linux-next. > > > > Biju Das (5): > > rtc: rx8581: Add rx8571 compatible > > rtc: rx8581: Add support for rx8571 RTC > > rtc: rx8581: Add support for Epson rx8571 RTC > > Applied 1-3. Note that I squashed 2 and 3 as 2 didn't make much sense > without 3. Thanks. Regards, Biju Renesas Electronics Europe GmbH,Geschaeftsfuehrer/President : Michael Hannawald, Sitz der Gesellschaft/Registered office: Duesseldorf, Arcadiastrasse 10, 40472 Duesseldorf, Germany,Handelsregister/Commercial Register: Duesseldorf, HRB 3708 USt-IDNr./Tax identification no.: DE 119353406 WEEE-Reg.-Nr./WEEE reg. no.: DE 14978647
