RE: [PATCH v4 0/2] i2c: designware: Add support for a bus clock

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> On Sat, Feb 23, 2019 at 09:32 +0100, wsa@xxxxxxxxxxxxx wrote:
>> On Thu, Feb 21, 2019 at 04:10:57PM +0000, Gareth Williams wrote:
>> The Synopsys I2C Controller has a peripheral clock that some SoCs
>> require to access the registers. This series also details the new
>> clock property in the bindings documentation.
>
> On Sat, Feb 23, 2019 at 09:32 +0100, wsa@xxxxxxxxxxxxx wrote:
> Your SoB is missing for patch 1. And besides my ack, I'd still like some feedback from the actual driver maintainers.

Thanks for the feedback Wolfram. I will wait for input from the driver maintainers.


Renesas Electronics Europe GmbH,Geschaeftsfuehrer/President : Michael Hannawald, Sitz der Gesellschaft/Registered office: Duesseldorf, Arcadiastrasse 10, 40472 Duesseldorf, Germany,Handelsregister/Commercial Register: Duesseldorf, HRB 3708 USt-IDNr./Tax identification no.: DE 119353406 WEEE-Reg.-Nr./WEEE reg. no.: DE 14978647




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux