We measured the clock on a Lager and an Ebisu board. The new formula
gives better results for both. So after Gen3, switch to this formula for
all Gen2 SoCs.
Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
---
drivers/i2c/busses/i2c-sh_mobile.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c
index 3c1552f14bec..6dfe1b3e2a3b 100644
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -802,14 +802,14 @@ static const struct of_device_id sh_mobile_i2c_dt_ids[] = {
{ .compatible = "renesas,iic-r8a7740", .data = &r8a7740_dt_config },
{ .compatible = "renesas,iic-r8a774c0", .data = &fast_clock_dt_config },
{ .compatible = "renesas,iic-r8a7790", .data = &v2_freq_calc_dt_config },
- { .compatible = "renesas,iic-r8a7791", .data = &fast_clock_dt_config },
- { .compatible = "renesas,iic-r8a7792", .data = &fast_clock_dt_config },
- { .compatible = "renesas,iic-r8a7793", .data = &fast_clock_dt_config },
- { .compatible = "renesas,iic-r8a7794", .data = &fast_clock_dt_config },
+ { .compatible = "renesas,iic-r8a7791", .data = &v2_freq_calc_dt_config },
+ { .compatible = "renesas,iic-r8a7792", .data = &v2_freq_calc_dt_config },
+ { .compatible = "renesas,iic-r8a7793", .data = &v2_freq_calc_dt_config },
+ { .compatible = "renesas,iic-r8a7794", .data = &v2_freq_calc_dt_config },
{ .compatible = "renesas,iic-r8a7795", .data = &v2_freq_calc_dt_config },
{ .compatible = "renesas,iic-r8a77990", .data = &v2_freq_calc_dt_config },
{ .compatible = "renesas,iic-sh73a0", .data = &fast_clock_dt_config },
- { .compatible = "renesas,rcar-gen2-iic", .data = &fast_clock_dt_config },
+ { .compatible = "renesas,rcar-gen2-iic", .data = &v2_freq_calc_dt_config },
{ .compatible = "renesas,rcar-gen3-iic", .data = &v2_freq_calc_dt_config },
{ .compatible = "renesas,rmobile-iic", .data = &default_dt_config },
{},
--
2.19.1
