Hi Olof, Hi Kevin, Hi Arnd, Please consider these Renesas ARM64 based SoC DT updates for v5.1. I am sending this pull-request now as a number of patches have accumulated in this branch. I expect to send a follow-up pull-request closer to the usual rc6 timing. The following changes since commit bfeffd155283772bbe78c6a05dec7c0128ee500c: Linux 5.0-rc1 (2019-01-06 17:08:20 -0800) are available in the git repository at: https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-arm64-dt-for-v5.1 for you to fetch changes up to 3e279a1d44d73aea9ce428ae68e76bf85117031a: arm64: dts: renesas: r8a77990: ebisu: Enable HS400 of SDHI3 (2019-01-23 09:45:41 +0100) ---------------------------------------------------------------- Renesas ARM64 Based SoC DT Updates for v5.1 R-Car H3 (r8a7795) SoC - Sort i2c and pciec0 nodes within soc node R-Car H3 (r8a7795) and M3-W (r8a7796) SoCs - Remove BUSIF0 settings from rcar_sound,ssi R-Car M3-W (r8a7796) based Salvator-XS board - Convert to new LVDS DT bindings R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) based ULCB boards - Use audio-graph-card to allow secondary sound device on kingfisher daugher board - Add HDMI sound support Kingfisher daughterboard for R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) based ULCB boards - Add pcm3168 sound codec R-Car E3 (r8a77990) SoC - Enable DMA for SCIF2 R-Car E3 (r8a77990) based Ebisu board - HS400 for onboard eMMC - Use simple-audio-card rather than simple-scu-audio-card - Correct EthernetAVB phy mode as rgmii - Add backlight and follow-up to correct duplicate regulator number R-Car V3M (r8a77970) based v3msk starter kit - Specify EtherAVB PHY IRQ now that GPIO support is present R-Car D3 (r8a77995) based draak board - Set better backlight levels RZ/G2M (r8a774a1) SoC - Correct hsusb reg size RZ/G2E (r8a774c0) SoC - Intial SoC DT - Add: and SYS-DMAC controller, SCIF, HSCIF, INTC-EX PFC, GPIO, Ethernet AVB, watchdog, secondary CA3 core, SDHI, I2C, IIC-DVFS, IPMU, CAN, thermal, MSIOF, audio, PWM, display output, USB2.0, USB-DMAC, HSUSB, USB3.0, IPMMU, PCIe, VIN and CSI-2 support - A follow-up patch included in this pull-request enables DMA for SCIF2 so that DMA is enabled for all SCIF nodes ---------------------------------------------------------------- Fabrizio Castro (27): arm64: dts: renesas: Initial device tree for r8a774c0 arm64: dts: renesas: r8a774c0: Add SYS-DMAC controller nodes arm64: dts: renesas: r8a774c0: Add SCIF and HSCIF nodes arm64: dts: renesas: r8a774c0: Add INTC-EX device node arm64: dts: renesas: r8a774c0: Add PFC support arm64: dts: renesas: r8a774c0: Add GPIO device nodes arm64: dts: renesas: r8a774c0: Add Ethernet AVB node arm64: dts: renesas: r8a774c0: Add watchdog support arm64: dts: renesas: r8a774c0: Add secondary CA53 CPU core arm64: dts: renesas: r8a774c0: Add SDHI nodes arm64: dts: renesas: r8a774c0: Add I2C and IIC-DVFS support arm64: dts: renesas: r8a774c0: Add IPMMU device nodes arm64: dts: renesas: r8a774c0: Add CAN nodes arm64: dts: renesas: r8a774c0: Add thermal support arm64: dts: renesas: r8a774c0: Add MSIOF nodes arm64: dts: renesas: r8a774c0: Add audio support arm64: dts: renesas: r8a774c0: Add PWM support arm64: dts: renesas: r8a774c0: Add display output support arm64: dts: renesas: r8a774c0: Add USB2.0 phy and host device nodes arm64: dts: renesas: r8a774c0: Add USB-DMAC and HSUSB device nodes arm64: dts: renesas: r8a774c0: Add USB3.0 device nodes arm64: dts: renesas: r8a774c0: Connect RZ/G2E SYS-DMAC to IPMMU arm64: dts: renesas: r8a774c0: Connect RZ/G2E AVB to IPMMU arm64: dts: renesas: r8a774c0: Connect RZ/G2E Audio-DMAC to IPMMU arm64: dts: renesas: r8a774c0: Add PCIe device node arm64: dts: renesas: r8a774c0: Add VIN and CSI-2 device nodes arm64: dts: renesas: r8a774a1: Fix hsusb reg size Geert Uytterhoeven (4): arm64: dts: renesas: r8a77990: Sort i2c nodes within soc node arm64: dts: renesas: r8a7796: salvator-xs: Convert to new LVDS DT bindings arm64: dts: renesas: r8a774c0: Enable DMA for SCIF2 arm64: dts: renesas: r8a77990: Enable DMA for SCIF2 Kazuya Mizuguchi (1): arm64: dts: renesas: r8a77990: ebisu: Fix EthernetAVB phy mode to rgmii Kuninori Morimoto (6): arm64: dts: renesas: ulcb: use audio-graph-card arm64: dts: renesas: ulcb: add HDMI sound support arm64: dts: renesas: ulcb-kf: add pcm3168 sound codec arm64: dts: renesas: r8a7795: remove BUSIF0 settings from rcar_sound,ssi arm64: dts: renesas: r8a7796: remove BUSIF0 settings from rcar_sound,ssi arm64: dts: renesas: r8a77990-ebisu: use simple-audio-card Laurent Pinchart (2): arm64: dts: renesas: r8a77990: ebisu: Add backlight arm64: dts: renesas: r8a77995: draak: Set better backlight levels Marek Vasut (1): arm64: dts: renesas: r8a77990: ebisu: Fix backlight regulator numbering Sergei Shtylyov (1): arm64: dts: renesas: v3msk: specify EtherAVB PHY IRQ Simon Horman (2): arm64: dts: renesas: r8a77990: sort pciec0 node within soc node arm64: dts: renesas: r8a77990: ebisu: Enable HS400 of SDHI3 arch/arm64/boot/dts/renesas/r8a774a1.dtsi | 2 +- arch/arm64/boot/dts/renesas/r8a774c0.dtsi | 1751 ++++++++++++++++++++ arch/arm64/boot/dts/renesas/r8a7795.dtsi | 40 +- .../arm64/boot/dts/renesas/r8a7796-salvator-xs.dts | 3 +- arch/arm64/boot/dts/renesas/r8a7796.dtsi | 40 +- arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts | 2 + arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts | 26 +- arch/arm64/boot/dts/renesas/r8a77990.dtsi | 194 +-- arch/arm64/boot/dts/renesas/r8a77995-draak.dts | 4 +- arch/arm64/boot/dts/renesas/ulcb-kf.dtsi | 138 ++ arch/arm64/boot/dts/renesas/ulcb.dtsi | 70 +- 11 files changed, 2107 insertions(+), 163 deletions(-) create mode 100644 arch/arm64/boot/dts/renesas/r8a774c0.dtsi
