Hi Mason,
On Fri, Jan 18, 2019 at 10:28 AM <masonccyang@xxxxxxxxxxx> wrote:
> I modified this dts to:
>
> Renesas R-Car Gen3 RPC-IF controller Device Tree Bindings
> --------------------------------------------------------------------
>
> Required properties:
> - compatible: should be an SoC-specific compatible value, followed by
> "renesas,rcar-gen3-rpc" as a fallback.
Please list the supported SoC-specific compatible values, so
scripts/checkpatch.pl
can validate patches adding RPC device nodes to DTS files.
> - #address-cells: should be 1
> - #size-cells: should be 0
> - reg: should contain three register areas:
> first for the base address of rpc-if registers,
> second for the direct mapping read mode and
> third for the write buffer area.
> - reg-names: should contain "regs", "dirmap" and "wbuf"
> - clock-names: should contain "rpc"
> - clocks: should contain 1 entries for the module's clock
Please revert the order of clocks and clock-names, cfr. reg and reg-names.
> Example:
>
> rpc: rpc@ee200000 {
> compatible = "renesas,r8a7795-rpc", "renesas,rcar-gen3-rpc";
> reg = <0 0xee200000 0 0x200>, <0 0x08000000 0 0x4000000>,
> <0 0xee208000 0 0x100>;
> reg-names = "regs", "dirmap", "wbuf";
> clocks = <&cpg CPG_MOD 917>;
> power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
> resets = <&cpg 917>;
> clock-names = "rpc";
Please move clock-names just below clocks.
> #address-cells = <1>;
> #size-cells = <0>;
>
> flash@0 {
> compatible = "jedec,spi-nor";
> reg = <0>;
> spi-max-frequency = <40000000>;
> spi-tx-bus-width = <1>;
> spi-rx-bus-width = <1>;
> };
> };
>
>
> If it is ok and I will submit it in [PATCH v7 2/2].
Looks good, with the above changes made.
Thanks!
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
