RE: [PATCH 07/11] arm64: dts: renesas: cat875: Add ethernet support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello Simon,

Thank you for your feedback!

> From: Simon Horman <horms@xxxxxxxxxxxx>
> Sent: 17 January 2019 12:00
> Subject: Re: [PATCH 07/11] arm64: dts: renesas: cat875: Add ethernet support
>
> On Wed, Jan 16, 2019 at 06:37:50PM +0000, Fabrizio Castro wrote:
> > From: Biju Das <biju.das@xxxxxxxxxxxxxx>
> >
> > This patch adds ethernet support to the sub board.
> >
> > Signed-off-by: Biju Das <biju.das@xxxxxxxxxxxxxx>
> > Signed-off-by: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
> > Reviewed-by: Chris Paterson <Chris.Paterson2@xxxxxxxxxxx>
> > ---
> >  arch/arm64/boot/dts/renesas/cat875.dtsi | 30 ++++++++++++++++++++++++++++++
> >  1 file changed, 30 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/renesas/cat875.dtsi b/arch/arm64/boot/dts/renesas/cat875.dtsi
> > index a41d0d8..805ffa7 100644
> > --- a/arch/arm64/boot/dts/renesas/cat875.dtsi
> > +++ b/arch/arm64/boot/dts/renesas/cat875.dtsi
> > @@ -7,4 +7,34 @@
> >
> >  / {
> >  model = "Silicon Linux sub board for CAT874 (CAT875)";
> > +
> > +aliases {
> > +ethernet0 = &avb;
> > +};
> > +};
> > +
> > +&avb {
> > +pinctrl-0 = <&avb_pins>;
> > +pinctrl-names = "default";
> > +renesas,no-ether-link;
>
> Is the renesas,no-ether-link required?

The AVB_LINK pin from the SoC is connected to the PMEB (Power Management Event, B stands for
active low) pin on the  PHY, which means it is not a link signal. The PMEB signal is active when a magic
packet or a wake up frame are detected. As a result, we need renesas,no-ether-link and we can't
specify avb_link with avb_pin either.

Thanks,
Fab

>
> My understanding is that "the property should only be used when a
> board does not provide a proper AVB_LINK signal". And from my reading
> of the schematic it looks like that signal may be provided on this board.
>
> That said, I have an outstanding patch for this for E3/Ebisu which
> I have not applied because I am unsure of its correctness.
>
> [PATCH] arm64: dts: renesas: ebisu: Remove renesas, no-ether-link property
> https://patchwork.kernel.org/patch/10692755/
>
> Similar patches have been applied for other boards.
> f.e:
>
> [PATCH] arm64: dts: renesas: salvator-x: Remove renesas, no-ether-link property
> https://git.kernel.org/torvalds/c/87c059e9c39d
>
> > +phy-handle = <&phy0>;
> > +phy-mode = "rgmii";
> > +status = "okay";
> > +
> > +phy0: ethernet-phy@0 {
> > +rxc-skew-ps = <1500>;
> > +reg = <0>;
> > +interrupt-parent = <&gpio2>;
> > +interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
> > +reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
> > +};
> > +};
> > +
> > +&pfc {
> > +avb_pins: avb {
> > +mux {
> > +groups = "avb_mii";
> > +function = "avb";
> > +};
> > +};
> >  };
> > --
> > 2.7.4
> >



Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered No. 04586709.




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux