[PATCH v2] dmaengine: usb-dmac: Make DMAC system sleep callbacks explicit

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Phuong Nguyen <phuong.nguyen.xw@xxxxxxxxxxx>

This commit fixes the issue that USB-DMAC hangs silently after system
resumes on R-Car Gen3 hence renesas_usbhs will not work correctly
when using USB-DMAC for bulk transfer e.g. ethernet or serial
gadgets.

The issue can be reproduced by these steps:
 1. modprobe g_serial
 2. Suspend and resume system.
 3. connect a usb cable to host side
 4. Transfer data from Host to Target
 5. cat /dev/ttyGS0 (Target side)
 6. echo "test" > /dev/ttyACM0 (Host side)

The 'cat' will not result anything. However, system still can work
normally.

Currently, USB-DMAC driver does not have system sleep callbacks hence
this driver relies on the PM core to force runtime suspend/resume to
suspend and reinitialize USB-DMAC during system resume. After
the commit 17218e0092f8 ("PM / genpd: Stop/start devices without
pm_runtime_force_suspend/resume()"), PM core will not force
runtime suspend/resume anymore so this issue happens.

To solve this, make system suspend resume explicit by using
pm_runtime_force_{suspend,resume}() as the system sleep callbacks.
SET_NOIRQ_SYSTEM_SLEEP_PM_OPS() is used to make sure USB-DMAC
suspended after and initialized before renesas_usbhs."

Signed-off-by: Phuong Nguyen <phuong.nguyen.xw@xxxxxxxxxxx>
Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@xxxxxxxxxxx>
Cc: <stable@xxxxxxxxxxxxxxx> # v4.16+
[shimoda: revise the commit log and add Cc tag]
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
---
 Changes from v1 (https://patchwork.kernel.org/patch/10767471/):
 - Revise the commit log.

 drivers/dma/sh/usb-dmac.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/dma/sh/usb-dmac.c b/drivers/dma/sh/usb-dmac.c
index 7f7184c..59403f6 100644
--- a/drivers/dma/sh/usb-dmac.c
+++ b/drivers/dma/sh/usb-dmac.c
@@ -694,6 +694,8 @@ static int usb_dmac_runtime_resume(struct device *dev)
 #endif /* CONFIG_PM */
 
 static const struct dev_pm_ops usb_dmac_pm = {
+	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+				      pm_runtime_force_resume)
 	SET_RUNTIME_PM_OPS(usb_dmac_runtime_suspend, usb_dmac_runtime_resume,
 			   NULL)
 };
-- 
1.9.1




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux