Hi Vinod (with correct email address),
I'm sorry, I should have checked your email address before I submitted...
Best regards,
Yoshihiro Shimoda
> From: Yoshihiro Shimoda, Sent: Thursday, January 17, 2019 11:42 AM
>
> From: Phuong Nguyen <phuong.nguyen.xw@xxxxxxxxxxx>
>
> This commit fixes the issue that USB-DMAC hangs silently after system
> resumes on R-Car Gen3 hence renesas_usbhs will not work correctly
> when using USB-DMAC for bulk transfer e.g. ethernet or serial
> gadgets.
>
> The issue can be reproduced by these steps:
> 1. modprobe g_serial
> 2. Suspend and resume system.
> 3. connect a usb cable to host side
> 4. Transfer data from Host to Target
> 5. cat /dev/ttyGS0 (Target side)
> 6. echo "test" > /dev/ttyACM0 (Host side)
>
> The 'cat' will not result anything. However, system still can work
> normally.
>
> Currently, USB-DMAC driver does not have system sleep callbacks hence
> this driver relies on the PM core to force runtime suspend/resume to
> suspend and reinitialize USB-DMAC during system resume. After
> the commit 17218e0092f8 ("PM / genpd: Stop/start devices without
> pm_runtime_force_suspend/resume()"), PM core will not force
> runtime suspend/resume anymore so this issue happens.
>
> To solve this, make system suspend resume explicit by using
> pm_runtime_force_{suspend,resume}() as the system sleep callbacks.
> SET_NOIRQ_SYSTEM_SLEEP_PM_OPS()is used to make sure USB-DMAC suspended
> after and initialized before renesas_usbhs."
>
> Signed-off-by: Phuong Nguyen <phuong.nguyen.xw@xxxxxxxxxxx>
> Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@xxxxxxxxxxx>
> Cc: <stable@xxxxxxxxxxxxxxx> # v4.16+
> [shimoda: revise the commit log and add Cc tag]
> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
> ---
> drivers/dma/sh/usb-dmac.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/dma/sh/usb-dmac.c b/drivers/dma/sh/usb-dmac.c
> index 7f7184c..59403f6 100644
> --- a/drivers/dma/sh/usb-dmac.c
> +++ b/drivers/dma/sh/usb-dmac.c
> @@ -694,6 +694,8 @@ static int usb_dmac_runtime_resume(struct device *dev)
> #endif /* CONFIG_PM */
>
> static const struct dev_pm_ops usb_dmac_pm = {
> + SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
> + pm_runtime_force_resume)
> SET_RUNTIME_PM_OPS(usb_dmac_runtime_suspend, usb_dmac_runtime_resume,
> NULL)
> };
> --
> 1.9.1
