Define the Condor/V3HSK board dependent parts of the RPC-IF device node.
Add device nodes for Spansion S25FS512S SPI flash and MTD partitions on it.
Based on the original patches by Dmitry Shifrin.
Signed-off-by: Dmitry Shifrin <dmitry.shifrin@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/renesas/r8a77980-condor.dts | 68 ++++++++++++++++++++++++
arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts | 68 ++++++++++++++++++++++++
2 files changed, 136 insertions(+)
Index: renesas/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
===================================================================
--- renesas.orig/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
+++ renesas/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
@@ -264,6 +264,11 @@
power-source = <1800>;
};
+ qspi0_pins: qspi0 {
+ groups = "qspi0_ctrl", "qspi0_data4";
+ function = "qspi0";
+ };
+
scif0_pins: scif0 {
groups = "scif0_data";
function = "scif0";
@@ -275,6 +280,69 @@
};
};
+&rpc {
+ pinctrl-0 = <&qspi0_pins>;
+ pinctrl-names = "default";
+
+ renesas,rpc-mode = "spi";
+ status = "okay";
+
+ flash@0 {
+ compatible = "spansion,s25fs512s", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ spi-rx-bus-width = <4>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ bootparam@0 {
+ reg = <0x00000000 0x040000>;
+ read-only;
+ };
+ cr7@40000 {
+ reg = <0x00040000 0x080000>;
+ read-only;
+ };
+ cert_header_sa3@c0000 {
+ reg = <0x000c0000 0x080000>;
+ read-only;
+ };
+ bl2@140000 {
+ reg = <0x00140000 0x040000>;
+ read-only;
+ };
+ cert_header_sa6@180000 {
+ reg = <0x00180000 0x040000>;
+ read-only;
+ };
+ bl31@1c0000 {
+ reg = <0x001c0000 0x460000>;
+ read-only;
+ };
+ uboot@640000 {
+ reg = <0x00640000 0x0c0000>;
+ read-only;
+ };
+ uboot-env@700000 {
+ reg = <0x00700000 0x040000>;
+ read-only;
+ };
+ dtb@740000 {
+ reg = <0x00740000 0x080000>;
+ };
+ kernel@7c0000 {
+ reg = <0x007c0000 0x1400000>;
+ };
+ user@1bc0000 {
+ reg = <0x01bc0000 0x2440000>;
+ };
+ };
+ };
+};
+
&rwdt {
timeout-sec = <60>;
status = "okay";
Index: renesas/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts
===================================================================
--- renesas.orig/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts
+++ renesas/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts
@@ -189,6 +189,11 @@
function = "i2c0";
};
+ qspi0_pins: qspi0 {
+ groups = "qspi0_ctrl", "qspi0_data4";
+ function = "qspi0";
+ };
+
scif0_pins: scif0 {
groups = "scif0_data";
function = "scif0";
@@ -200,6 +205,69 @@
};
};
+&rpc {
+ pinctrl-0 = <&qspi0_pins>;
+ pinctrl-names = "default";
+
+ renesas,rpc-mode = "spi";
+ status = "okay";
+
+ flash@0 {
+ compatible = "spansion,s25fs512s", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ spi-rx-bus-width = <4>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ bootparam@0 {
+ reg = <0x00000000 0x040000>;
+ read-only;
+ };
+ cr7@00040000 {
+ reg = <0x00040000 0x080000>;
+ read-only;
+ };
+ cert_header_sa3@000C0000 {
+ reg = <0x000C0000 0x080000>;
+ read-only;
+ };
+ bl2@00140000 {
+ reg = <0x00140000 0x040000>;
+ read-only;
+ };
+ cert_header_sa6@00180000 {
+ reg = <0x00180000 0x040000>;
+ read-only;
+ };
+ bl31@001C0000 {
+ reg = <0x001C0000 0x460000>;
+ read-only;
+ };
+ uboot@00640000 {
+ reg = <0x00640000 0x0C0000>;
+ read-only;
+ };
+ uboot-env@00700000 {
+ reg = <0x00700000 0x040000>;
+ read-only;
+ };
+ dtb@00740000 {
+ reg = <0x00740000 0x080000>;
+ };
+ kernel@007C0000 {
+ reg = <0x007C0000 0x1400000>;
+ };
+ user@01BC0000 {
+ reg = <0x01BC0000 0x2440000>;
+ };
+ };
+ };
+};
+
&rwdt {
timeout-sec = <60>;
status = "okay";
