On Fri, Jan 11, 2019 at 01:13:40PM +0100, Geert Uytterhoeven wrote:
> From: Takeshi Kihara <takeshi.kihara.df@xxxxxxxxxxx>
>
> According to the R-Car Gen3 Hardware Manual Errata for Rev 1.00 of
> Aug 24, 2018, the MOD_SEL0 bit3 is set to 0 when TX0_A pin function is
> selected, and the MOD_SEL0 bit3 is set to 1 when TX0_B pin function is
> selected.
>
> Fixes: 6d4036a1e3b3ac0f ("pinctrl: sh-pfc: Initial R8A77990 PFC support")
> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@xxxxxxxxxxx>
> Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
> ---
> To be queued in sh-pfc-for-v5.1.
Reviewed-by: Simon Horman <horms+renesas@xxxxxxxxxxxx>
>
> drivers/pinctrl/sh-pfc/pfc-r8a77990.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a77990.c b/drivers/pinctrl/sh-pfc/pfc-r8a77990.c
> index db8e1f1e91551b93..3ce1b24a9d6e95f2 100644
> --- a/drivers/pinctrl/sh-pfc/pfc-r8a77990.c
> +++ b/drivers/pinctrl/sh-pfc/pfc-r8a77990.c
> @@ -1073,7 +1073,7 @@ static const u16 pinmux_data[] = {
> PINMUX_IPSR_GPSR(IP11_11_8, RIF1_SYNC),
> PINMUX_IPSR_GPSR(IP11_11_8, TS_SCK1),
>
> - PINMUX_IPSR_GPSR(IP11_15_12, TX0_A),
> + PINMUX_IPSR_MSEL(IP11_15_12, TX0_A, SEL_SCIF0_0),
> PINMUX_IPSR_GPSR(IP11_15_12, HTX1_A),
> PINMUX_IPSR_MSEL(IP11_15_12, SSI_WS2_A, SEL_SSI2_0),
> PINMUX_IPSR_GPSR(IP11_15_12, RIF1_D0),
> @@ -1183,7 +1183,7 @@ static const u16 pinmux_data[] = {
> PINMUX_IPSR_MSEL(IP13_19_16, SIM0_D_A, SEL_SIMCARD_0),
>
> PINMUX_IPSR_GPSR(IP13_23_20, MLB_DAT),
> - PINMUX_IPSR_GPSR(IP13_23_20, TX0_B),
> + PINMUX_IPSR_MSEL(IP13_23_20, TX0_B, SEL_SCIF0_1),
> PINMUX_IPSR_MSEL(IP13_23_20, RIF0_SYNC_A, SEL_DRIF0_0),
> PINMUX_IPSR_GPSR(IP13_23_20, SIM0_CLK_A),
>
> --
> 2.17.1
>
