On Fri, Dec 14, 2018 at 09:37:34AM +0000, Fabrizio Castro wrote:
> Add usb dmac and hsusb device nodes on RZ/G2E SoC dtsi.
>
> Signed-off-by: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/renesas/r8a774c0.dtsi | 45 +++++++++++++++++++++++++++++++
> 1 file changed, 45 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
> index 0ab3aa6..79cdaac 100644
> --- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
> @@ -514,6 +514,51 @@
> status = "disabled";
> };
>
> + hsusb: usb@e6590000 {
> + compatible = "renesas,usbhs-r8a774c0",
> + "renesas,rcar-gen3-usbhs";
> + reg = <0 0xe6590000 0 0x200>;
The above looks good but while reviewing this patch I noticed
that the size of the hsusb register range on in the DT for r8a774a1
is 0x100, Is that correct?
As for this patch, it looks good to me but I will wait to see if there are
other reviews before applying.
Reviewed-by: Simon Horman <horms+renesas@xxxxxxxxxxxx>
> + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>;
> + dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
> + <&usb_dmac1 0>, <&usb_dmac1 1>;
> + dma-names = "ch0", "ch1", "ch2", "ch3";
> + renesas,buswait = <11>;
> + phys = <&usb2_phy0>;
> + phy-names = "usb";
> + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
> + resets = <&cpg 704>, <&cpg 703>;
> + status = "disabled";
> + };
> +
> + usb_dmac0: dma-controller@e65a0000 {
> + compatible = "renesas,r8a774c0-usb-dmac",
> + "renesas,usb-dmac";
> + reg = <0 0xe65a0000 0 0x100>;
> + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
> + GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "ch0", "ch1";
> + clocks = <&cpg CPG_MOD 330>;
> + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
> + resets = <&cpg 330>;
> + #dma-cells = <1>;
> + dma-channels = <2>;
> + };
> +
> + usb_dmac1: dma-controller@e65b0000 {
> + compatible = "renesas,r8a774c0-usb-dmac",
> + "renesas,usb-dmac";
> + reg = <0 0xe65b0000 0 0x100>;
> + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
> + GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "ch0", "ch1";
> + clocks = <&cpg CPG_MOD 331>;
> + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
> + resets = <&cpg 331>;
> + #dma-cells = <1>;
> + dma-channels = <2>;
> + };
> +
> dmac0: dma-controller@e6700000 {
> compatible = "renesas,dmac-r8a774c0",
> "renesas,rcar-dmac";
> --
> 2.7.4
>
