Hi Fabrizio,
> From: Fabrizio Castro, Sent: Friday, December 14, 2018 5:27 PM
>
> HS-USB found in RZ/G2E (a.k.a. r8a774c0) is very similar to the
> one found in R-Car E3 (a.k.a. r8a77990), as it needs to release
> the PLL reset by the UGCTRL register like R-Car E3, therefore add
> r8a774c0 support in a similar fashion to what was done for the
> r8a77990.
>
> Signed-off-by: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
Thank you for the patch!
Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
Best regards,
Yoshihiro Shimoda
> ---
> drivers/usb/renesas_usbhs/common.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c
> index 2ff7991..249fbee 100644
> --- a/drivers/usb/renesas_usbhs/common.c
> +++ b/drivers/usb/renesas_usbhs/common.c
> @@ -540,6 +540,10 @@ static int usbhsc_drvcllbck_notify_hotplug(struct platform_device *pdev)
> */
> static const struct of_device_id usbhs_of_match[] = {
> {
> + .compatible = "renesas,usbhs-r8a774c0",
> + .data = (void *)USBHS_TYPE_RCAR_GEN3_WITH_PLL,
> + },
> + {
> .compatible = "renesas,usbhs-r8a7790",
> .data = (void *)USBHS_TYPE_RCAR_GEN2,
> },
> --
> 2.7.4
