Add simple suspend/resume handlers to the driver to restore the chip
configuration after resume. It is possible that the chip was configured
with non-default values before suspend-resume cycle and that the chip
is powered down during this cycle, so the configuration could get lost.
Signed-off-by: Marek Vasut <marek.vasut+renesas@xxxxxxxxx>
Cc: Alexey Firago <alexey_firago@xxxxxxxxxx>
Cc: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
Cc: Michael Turquette <mturquette@xxxxxxxxxxxx>
Cc: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
Cc: linux-renesas-soc@xxxxxxxxxxxxxxx
---
V2: Replace ifdef with __maybe_unused
Simplify return value handling in resume
V3: Drop useless regcache_sync() call from suspend callback
(thanks Laurent for testing with working DU)
---
drivers/clk/clk-versaclock5.c | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/drivers/clk/clk-versaclock5.c b/drivers/clk/clk-versaclock5.c
index decffb3826ec..5b393e711e94 100644
--- a/drivers/clk/clk-versaclock5.c
+++ b/drivers/clk/clk-versaclock5.c
@@ -906,6 +906,28 @@ static int vc5_remove(struct i2c_client *client)
return 0;
}
+static int __maybe_unused vc5_suspend(struct device *dev)
+{
+ struct vc5_driver_data *vc5 = dev_get_drvdata(dev);
+
+ regcache_cache_only(vc5->regmap, true);
+ regcache_mark_dirty(vc5->regmap);
+
+ return 0;
+}
+
+static int __maybe_unused vc5_resume(struct device *dev)
+{
+ struct vc5_driver_data *vc5 = dev_get_drvdata(dev);
+ int ret;
+
+ regcache_cache_only(vc5->regmap, false);
+ ret = regcache_sync(vc5->regmap);
+ if (ret)
+ dev_err(dev, "Failed to restore register map: %d\n", ret);
+ return ret;
+}
+
static const struct vc5_chip_info idt_5p49v5923_info = {
.model = IDT_VC5_5P49V5923,
.clk_fod_cnt = 2,
@@ -961,9 +983,12 @@ static const struct of_device_id clk_vc5_of_match[] = {
};
MODULE_DEVICE_TABLE(of, clk_vc5_of_match);
+static SIMPLE_DEV_PM_OPS(vc5_pm_ops, vc5_suspend, vc5_resume);
+
static struct i2c_driver vc5_driver = {
.driver = {
.name = "vc5",
+ .pm = &vc5_pm_ops,
.of_match_table = clk_vc5_of_match,
},
.probe = vc5_probe,
--
2.18.0
