Re: [PATCH 1/5] media: adv748x: Rework reset procedure

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Heya

On 12/12/2018 08:16, jacopo mondi wrote:
> Hi Kieran,
>    thanks for review
> 
> On Tue, Dec 11, 2018 at 11:52:03PM +0000, Kieran Bingham wrote:
>> Hi Jacopo,
>>
>> On 11/12/2018 15:16, Jacopo Mondi wrote:
>>> Re-work the chip reset procedure to configure the CP (HDMI) and SD (AFE) cores
>>> before resetting the MIPI CSI-2 TXs.
>>>
>>> Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
>>> ---
>>>  drivers/media/i2c/adv748x/adv748x-core.c | 24 ++++++++++--------------
>>>  1 file changed, 10 insertions(+), 14 deletions(-)
>>>
>>> diff --git a/drivers/media/i2c/adv748x/adv748x-core.c b/drivers/media/i2c/adv748x/adv748x-core.c
>>> index d94c63cb6a2e..5495dc7891e8 100644
>>> --- a/drivers/media/i2c/adv748x/adv748x-core.c
>>> +++ b/drivers/media/i2c/adv748x/adv748x-core.c
>>> @@ -353,9 +353,8 @@ static const struct adv748x_reg_value adv748x_sw_reset[] = {
>>>  	{ADV748X_PAGE_EOR, 0xff, 0xff}	/* End of register table */
>>>  };
>>>
>>> -/* Supported Formats For Script Below */
>>> -/* - 01-29 HDMI to MIPI TxA CSI 4-Lane - RGB888: */
>>
>> Is this information redundant ? (CSI-4Lane, RGB888 configuration?)
>>
> 
> The CSI-2 data lane configuration has been break out from this table
> by Niklas' patches. I've tried also moving the format configuration
> out of this, but I haven't sent that change. The HDMI video direction
> is now handled at link setup time, so I guess the only relevant
> information is about the RGB888 format configured on the CP backend.
> I'll keep that.
> 

Thanks for the clarification.

>>> -static const struct adv748x_reg_value adv748x_init_txa_4lane[] = {
>>> +/* Initialize CP Core. */
>>> +static const struct adv748x_reg_value adv748x_init_hdmi[] = {
>>
>> While we're here - is there much scope - or value in changing these
>> tables to functions with parameters using Niklas' adv748x_write_check() ?
>>
>> The suggestion only has value if there are parameters that we would need
>> to configure. So it might be reasonable to leave these tables.
>>
> 
> Right now I don't see much value in that. I would prefer breaking out
> the format configuration from this static tables, but that's for
> later.

Perfect - I agree - doesn't need to happen in this patch.

If the format configuration can be broken out from the table later then
that's great news.



>> A general Ack on renaming to the function instead of the
>> TX/configuration though - as that makes the purpose clearer.
>>
>>
>>>  	/* Disable chip powerdown & Enable HDMI Rx block */
>>>  	{ADV748X_PAGE_IO, 0x00, 0x40},
>>>
>>> @@ -399,10 +398,8 @@ static const struct adv748x_reg_value adv748x_init_txa_4lane[] = {
>>>  	{ADV748X_PAGE_EOR, 0xff, 0xff}	/* End of register table */
>>>  };
>>>
>>> -/* 02-01 Analog CVBS to MIPI TX-B CSI 1-Lane - */
>>> -/* Autodetect CVBS Single Ended In Ain 1 - MIPI Out */
>>> -static const struct adv748x_reg_value adv748x_init_txb_1lane[] = {
>>> -
>>
>> Same comments as above really :)
>>
> 
> I'll see what I can keep.
> 
> Thanks
>   j
> 
>>> +/* Initialize AFE core. */
>>> +static const struct adv748x_reg_value adv748x_init_afe[] = {
>>>  	{ADV748X_PAGE_IO, 0x00, 0x30},	/* Disable chip powerdown Rx */
>>>  	{ADV748X_PAGE_IO, 0xf2, 0x01},	/* Enable I2C Read Auto-Increment */
>>>
>>> @@ -445,19 +442,18 @@ static int adv748x_reset(struct adv748x_state *state)
>>>  	if (ret < 0)
>>>  		return ret;
>>>
>>> -	/* Init and power down TXA */
>>> -	ret = adv748x_write_regs(state, adv748x_init_txa_4lane);
>>> +	/* Initialize CP and AFE cores. */
>>> +	ret = adv748x_write_regs(state, adv748x_init_hdmi);
>>>  	if (ret)
>>>  		return ret;
>>>
>>> -	adv748x_tx_power(&state->txa, 1);
>>> -	adv748x_tx_power(&state->txa, 0);
>>> -
>>> -	/* Init and power down TXB */
>>> -	ret = adv748x_write_regs(state, adv748x_init_txb_1lane);
>>> +	ret = adv748x_write_regs(state, adv748x_init_afe);
>>>  	if (ret)
>>>  		return ret;
>>>
>>> +	/* Reset TXA and TXB */
>>> +	adv748x_tx_power(&state->txa, 1);
>>> +	adv748x_tx_power(&state->txa, 0);
>>>  	adv748x_tx_power(&state->txb, 1);
>>>  	adv748x_tx_power(&state->txb, 0);
>>>
>>> --
>>> 2.7.4
>>>
>>
>> --
>> Regards
>> --
>> Kieran

-- 
Regards
--
Kieran



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux