From: Biju Das <biju.das@xxxxxxxxxxxxxx>
The iWave RZ/G1N board is almost identical to RZ/G1M. cmt and rwdt modules
are SoC specific and should be part of board dts rather than SoM dtsi. By
moving these nodes to the common dtsi it allows cmt and rwdt to be enabled
on both of these boards with less lines of code.
Signed-off-by: Biju Das <biju.das@xxxxxxxxxxxxxx>
Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Signed-off-by: Simon Horman <horms+renesas@xxxxxxxxxxxx>
---
arch/arm/boot/dts/iwg20d-q7-common.dtsi | 9 +++++++++
arch/arm/boot/dts/r8a7743-iwg20m.dtsi | 9 ---------
2 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
index ca9154dd8052..e2b1ab9b56e5 100644
--- a/arch/arm/boot/dts/iwg20d-q7-common.dtsi
+++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
@@ -116,6 +116,10 @@
status = "okay";
};
+&cmt0 {
+ status = "okay";
+};
+
&hsusb {
status = "okay";
pinctrl-0 = <&usb0_pins>;
@@ -230,6 +234,11 @@
};
};
+&rwdt {
+ timeout-sec = <60>;
+ status = "okay";
+};
+
&scif0 {
pinctrl-0 = <&scif0_pins>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/r8a7743-iwg20m.dtsi b/arch/arm/boot/dts/r8a7743-iwg20m.dtsi
index 0e2e033cc849..b3fee1d61c87 100644
--- a/arch/arm/boot/dts/r8a7743-iwg20m.dtsi
+++ b/arch/arm/boot/dts/r8a7743-iwg20m.dtsi
@@ -31,10 +31,6 @@
};
};
-&cmt0 {
- status = "okay";
-};
-
&extal_clk {
clock-frequency = <20000000>;
};
@@ -88,11 +84,6 @@
};
};
-&rwdt {
- timeout-sec = <60>;
- status = "okay";
-};
-
&sdhi0 {
pinctrl-0 = <&sdhi0_pins>;
pinctrl-names = "default";
--
2.11.0
