Re: [PATCH 1/2] dt-bindings: can: rcar_canfd: document r8a77965 support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 12/04/2018 11:56 PM, Rob Herring wrote:
> On Sun, Nov 18, 2018 at 06:32:00PM +0100, Marek Vasut wrote:
>> Document the support for rcar_canfd on R8A77965 SoC devices.
>>
>> Signed-off-by: Marek Vasut <marek.vasut+renesas@xxxxxxxxx>
>> Cc: Eugeniu Rosca <erosca@xxxxxxxxxxxxxx>
>> Cc: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
>> Cc: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
>> Cc: Rob Herring <robh@xxxxxxxxxx>
>> Cc: Simon Horman <horms+renesas@xxxxxxxxxxxx>
>> Cc: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
>> Cc: linux-renesas-soc@xxxxxxxxxxxxxxx
>> ---
>>  .../devicetree/bindings/net/can/rcar_canfd.txt      | 13 +++++++------
>>  1 file changed, 7 insertions(+), 6 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/net/can/rcar_canfd.txt b/Documentation/devicetree/bindings/net/can/rcar_canfd.txt
>> index ac71daa46195..4720e916fbdd 100644
>> --- a/Documentation/devicetree/bindings/net/can/rcar_canfd.txt
>> +++ b/Documentation/devicetree/bindings/net/can/rcar_canfd.txt
>> @@ -6,6 +6,7 @@ Required properties:
>>    - "renesas,rcar-gen3-canfd" for R-Car Gen3 compatible controller.
>>    - "renesas,r8a7795-canfd" for R8A7795 (R-Car H3) compatible controller.
>>    - "renesas,r8a7796-canfd" for R8A7796 (R-Car M3-W) compatible controller.
>> +  - "renesas,r8a77965-canfd" for R8A77965 (R-Car M3-N) compatible controller.
>>    - "renesas,r8a77970-canfd" for R8A77970 (R-Car V3M) compatible controller.
>>    - "renesas,r8a77980-canfd" for R8A77980 (R-Car V3H) compatible controller.
>>  
>> @@ -26,12 +27,12 @@ The name of the child nodes are "channel0" and "channel1" respectively. Each
>>  child node supports the "status" property only, which is used to
>>  enable/disable the respective channel.
>>  
>> -Required properties for "renesas,r8a7795-canfd" and "renesas,r8a7796-canfd"
>> -compatible:
>> -In R8A7795 and R8A7796 SoCs, canfd clock is a div6 clock and can be used by both
>> -CAN and CAN FD controller at the same time. It needs to be scaled to maximum
>> -frequency if any of these controllers use it. This is done using the below
>> -properties:
>> +Required properties for "renesas,r8a7795-canfd", "renesas,r8a7796-canfd" and
>> +"renesas,r8a77965-canfd" compatible:
>> +In R8A7795, R8A7796 and R8A77965 SoCs, canfd clock is a div6 clock and can
> 
> Do we have to list the SoCs twice so that the paragraph has to be 
> reformatted every time? Just the compatibles above should be enough.

We don't , but that's about it for the SoCs that need this.

>> +be used by both CAN and CAN FD controller at the same time. It needs to be
>> +scaled to maximum frequency if any of these controllers use it. This is done
>> +using the below properties:
>>  
>>  - assigned-clocks: phandle of canfd clock.
>>  - assigned-clock-rates: maximum frequency of this clock.
>> -- 
>> 2.18.0
>>


-- 
Best regards,
Marek Vasut



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux