Hi Simon, Could you please consider taking this patch in your tree ? It's independent from the rest of the series. On Sunday, 25 November 2018 16:40:30 EET Laurent Pinchart wrote: > Add the backlight device for the LVDS1 output, in preparation for panel > support. > > Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx> > --- > .../arm64/boot/dts/renesas/r8a77995-draak.dts | 20 +++++++++++++++++++ > 1 file changed, 20 insertions(+) > > diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts > b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts index > 2405eaad0296..cd067319e6f3 100644 > --- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts > +++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts > @@ -24,6 +24,17 @@ > stdout-path = "serial0:115200n8"; > }; > > + backlight: backlight { > + compatible = "pwm-backlight"; > + pwms = <&pwm1 0 50000>; > + > + brightness-levels = <256 128 64 16 8 4 0>; > + default-brightness-level = <6>; > + > + power-supply = <®_12p0v>; > + enable-gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>; > + }; > + > composite-in { > compatible = "composite-video-connector"; > > @@ -104,6 +115,15 @@ > regulator-always-on; > }; > > + reg_12p0v: regulator1 { > + compatible = "regulator-fixed"; > + regulator-name = "D12.0V"; > + regulator-min-microvolt = <12000000>; > + regulator-max-microvolt = <12000000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > vga { > compatible = "vga-connector"; -- Regards, Laurent Pinchart