This patch modifies rcar_gen3_init_otg() procedure to follow Figure 73.4 of "R-Car Series, 3rd Generation User's Manual: Hardware Rev.1.00". Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx> --- This patch is based on linux-phy.git / latest next branch (commit id = 9b28b23a7a12cb07536da93100a907f772f00fea) Changes from v1: - Just write value to registers instead of read-modify-write functions (rcar_gen3_set_linectrl() and rcar_gen3_control_otg_irq(). Also, this is the first email I send after changing the email server to avoid using quoted-printable encoding. drivers/phy/renesas/phy-rcar-gen3-usb2.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c index d0f412c..0a34782 100644 --- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c +++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c @@ -307,16 +307,21 @@ static void rcar_gen3_init_otg(struct rcar_gen3_chan *ch) void __iomem *usb2_base = ch->base; u32 val; + /* Should not use functions of read-modify-write a register */ + val = readl(usb2_base + USB2_LINECTRL1); + val = (val & ~USB2_LINECTRL1_DP_RPD) | USB2_LINECTRL1_DPRPD_EN | + USB2_LINECTRL1_DMRPD_EN | USB2_LINECTRL1_DM_RPD; + writel(val, usb2_base + USB2_LINECTRL1); + val = readl(usb2_base + USB2_VBCTRL); writel(val | USB2_VBCTRL_DRVVBUSSEL, usb2_base + USB2_VBCTRL); - writel(USB2_OBINT_BITS, usb2_base + USB2_OBINTSTA); - rcar_gen3_control_otg_irq(ch, 1); val = readl(usb2_base + USB2_ADPCTRL); writel(val | USB2_ADPCTRL_IDPULLUP, usb2_base + USB2_ADPCTRL); - val = readl(usb2_base + USB2_LINECTRL1); - rcar_gen3_set_linectrl(ch, 0, 0); - writel(val | USB2_LINECTRL1_DPRPD_EN | USB2_LINECTRL1_DMRPD_EN, - usb2_base + USB2_LINECTRL1); + + msleep(20); + + writel(0xffffffff, usb2_base + USB2_OBINTSTA); + writel(USB2_OBINT_BITS, usb2_base + USB2_OBINTEN); rcar_gen3_device_recognition(ch); } -- 1.9.1
