From: Biju Das <biju.das@xxxxxxxxxxxxxx>
Adding pinctrl support for EtherAVB interface.
Signed-off-by: Biju Das <biju.das@xxxxxxxxxxxxxx>
Reviewed-by: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Signed-off-by: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
Signed-off-by: Simon Horman <horms+renesas@xxxxxxxxxxxx>
---
arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
index 18d22631e188..52f23b858885 100644
--- a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
+++ b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
@@ -60,6 +60,9 @@
};
&avb {
+ pinctrl-0 = <&avb_pins>;
+ pinctrl-names = "default";
+
phy-handle = <&phy3>;
phy-mode = "gmii";
renesas,no-ether-link;
@@ -82,6 +85,11 @@
};
&pfc {
+ avb_pins: avb {
+ groups = "avb_mdio", "avb_gmii_tx_rx";
+ function = "avb";
+ };
+
mmc_pins_uhs: mmc_uhs {
groups = "mmc_data8", "mmc_ctrl";
function = "mmc";
--
2.11.0
