RE: [PATCH 4/5] drm: rcar-du: Add R8A7744 support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Thank you Laurent.

Cheers,
Fab

> From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> Sent: 23 November 2018 12:05
> Subject: Re: [PATCH 4/5] drm: rcar-du: Add R8A7744 support
>
> Hi Fabrizio,
>
> On Thursday, 22 November 2018 17:59:32 EET Fabrizio Castro wrote:
> > On 15 October 2018 23:25 Laurent Pinchart wrote:
> > > On Friday, 21 September 2018 21:08:30 EEST Fabrizio Castro wrote:
> > >> From: Biju Das <biju.das@xxxxxxxxxxxxxx>
> > >>
> > >> Add support for the R8A7744 DU (which is very similar to the R8A7743
> > >> DU);
> > >> it has 1 DPAD (RGB) output and 1 LVDS output.
> > >>
> > >> Signed-off-by: Biju Das <biju.das@xxxxxxxxxxxxxx>
> > >> Reviewed-by: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
> > >> ---
> > >>
> > >>  drivers/gpu/drm/rcar-du/rcar_du_drv.c | 1 +
> > >>  1 file changed, 1 insertion(+)
> > >>
> > >> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> > >> b/drivers/gpu/drm/rcar-du/rcar_du_drv.c index c07d3f1..2c3d0e5 100644
> > >> --- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> > >> +++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> > >> @@ -321,6 +321,7 @@ static const struct rcar_du_device_info
> > >> rcar_du_r8a77970_info = {
> > >>  static const struct of_device_id rcar_du_of_table[] = {
> > >>  { .compatible = "renesas,du-r8a7743", .data = &rzg1_du_r8a7743_info },
> > >> +{ .compatible = "renesas,du-r8a7744", .data = &rzg1_du_r8a7743_info },
> > >>  { .compatible = "renesas,du-r8a7745", .data = &rzg1_du_r8a7745_info },
> > >>  { .compatible = "renesas,du-r8a77470", .data = &rzg1_du_r8a77470_info
> > >>  },
> > >>  { .compatible = "renesas,du-r8a7779", .data = &rcar_du_r8a7779_info },
> > >
> > > This looks good to me. I would also apply this change:
> > >
> > > @@ -41,7 +41,7 @@ static const struct rcar_du_device_info
> > > rzg1_du_r8a7743_info = {
> > >         .channels_mask = BIT(1) | BIT(0),
> > >         .routes = {
> > >                 /*
> > > -                * R8A7743 has one RGB output and one LVDS output
> > > +                * R8A774[34] has one RGB output and one LVDS output
> > >                  */
> > >                 [RCAR_DU_OUTPUT_DPAD0] = {
> > >                         .possible_crtcs = BIT(1) | BIT(0),
> > >
> > > With this,
> > >
> > > Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> > >
> > > There's no need to resubmit, I've applied the patch to my tree with the
> > > above change.
> >
> > I was expecting to see this patch at least on linux-next by now but it looks
> > like it's not in there, could you please double check what happened to it?
>
> I've sent the R-Car DU v4.21 pull request today, it should end up in linux-
> next in the near future.
>
> --
> Regards,
>
> Laurent Pinchart
>
>




Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered No. 04586709.




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux