[PATCH 0/7] Add support for iWave G20D-Q7 board based on RZ/G1N

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch series aims to add support for iWave G20D-Q7 board based on RZ/G1N.

This patch series is tested against renesas-dev

Biju Das (7):
  ARM: dts: r8a7744-iwg20m: Add iWave RZ/G1N Qseven SOM
  ARM: dts: r8a7744: Initial SoC device tree
  ARM: dts: r8a7744-iwg20d-q7: Add support for iWave G20D-Q7 board based
    on RZ/G1N
  ARM: dts: r8a7744: Add SYS-DMAC support
  ARM: dts: r8a7744: Add GPIO support
  ARM: dts: r8a7744: Add Ethernet AVB support
  ARM: dts: r8a7744: Add SMP support

 arch/arm/boot/dts/Makefile              |   1 +
 arch/arm/boot/dts/r8a7744-iwg20d-q7.dts |  15 +
 arch/arm/boot/dts/r8a7744-iwg20m.dtsi   |  31 ++
 arch/arm/boot/dts/r8a7744.dtsi          | 561 ++++++++++++++++++++++++++++++++
 4 files changed, 608 insertions(+)
 create mode 100644 arch/arm/boot/dts/r8a7744-iwg20d-q7.dts
 create mode 100644 arch/arm/boot/dts/r8a7744-iwg20m.dtsi
 create mode 100644 arch/arm/boot/dts/r8a7744.dtsi

-- 
2.7.4




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux