Re: [PATCH 3/4] arm64: renesas: ulcb-kf: add pcm3168 sound codec

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Morimoto-san


On 2018/11/08 22:36, Jiada Wang wrote:
Hi Morimoto-san

with the TDM Split patch-set you sent earlier in community,
together with this DTS change set,
I am able to test TDM Split mode,
just some minor findings.

On 2018/11/08 10:59, Kuninori Morimoto wrote:
From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>

KingFisher has pcm3168 sound codec. This patch enables it.
Because pcm3168 can't handle symmetric channel on playback/
capture, we need to handle it as different DAI.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
---
  arch/arm64/boot/dts/renesas/ulcb-kf.dtsi | 151 +++++++++++++++++++++++++++++++
  1 file changed, 151 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
index 1b316d79..fdd625d 100644
--- a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
@@ -6,11 +6,50 @@
   * Copyright (C) 2017 Cogent Embedded, Inc.
   */
  +/*
+ * SSI-PCM3168A
+ *    aplay   -D plughw:0,2 xxx.wav
+ *    arecord -D plughw:0,3 xxx.wav
+ */
+
  / {
      aliases {
          serial1 = &hscif0;
          serial2 = &scif1;
      };
+
+    clk8snd: clk8snd {
+        compatible = "fixed-clock";
+        #clock-cells = <0>;
+        clock-frequency = <24576000>;
+    };
This is the same clock as cs2000, why not directly refer to &cs2000 from clksndsel,
otherwise, if snd_soc_rcar is loaded after snd_soc_pcm3168a_i2c,
load of snd_soc_pcm3168a_i2c fails with
"[    8.412356] pcm3168a 15-0044: Failed to reset device: -6"
and sound cards can not be created


Could you let me know your thoughts on this?

thanks,
Jiada

Thanks,
Jiada
+
+    clksnd: clksnd {
+        compatible = "fixed-clock";
+        #clock-cells = <0>;
+        clock-frequency = <22579200>;
+    };
+
+    clksndsel: clksndsel {
+        #clock-cells = <0>;
+        compatible = "gpio-mux-clock";
+        clocks = <&clk8snd>, <&clksnd>;
+        select-gpios = <&gpio_exp_75 13 GPIO_ACTIVE_HIGH>;
+    };
+
+    snd_3p3v: regulator-snd_3p3v {
+        compatible = "regulator-fixed";
+        regulator-name = "snd-3.3v";
+        regulator-min-microvolt = <3300000>;
+        regulator-max-microvolt = <3300000>;
+    };
+
+    snd_vcc5v: regulator-snd_vcc5v {
+        compatible = "regulator-fixed";
+        regulator-name = "snd-vcc5v";
+        regulator-min-microvolt = <5000000>;
+        regulator-max-microvolt = <5000000>;
+    };
  };
    &can0 {
@@ -44,6 +83,7 @@
  };
    &i2c2 {
+    /* U11 */
      gpio_exp_74: gpio@74 {
          compatible = "ti,tca9539";
          reg = <0x74>;
@@ -53,6 +93,13 @@
          interrupt-parent = <&gpio6>;
          interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
  +        audio_out_off {
+            gpio-hog;
+            gpios = <0 GPIO_ACTIVE_HIGH>; /* P00 */
+            output-high;
+            line-name = "Audio_Out_OFF";
+        };
+
          hub_pwen {
              gpio-hog;
              gpios = <6 GPIO_ACTIVE_HIGH>;
@@ -80,8 +127,16 @@
              output-high;
              line-name = "OTG EXTLPn";
          };
+
+        snd_rst {
+            gpio-hog;
+            gpios = <15 GPIO_ACTIVE_HIGH>; /* P17 */
+            output-high;
+            line-name = "SND_RST";
+        };
      };
  +    /* U5 */
      gpio_exp_75: gpio@75 {
          compatible = "ti,tca9539";
          reg = <0x75>;
@@ -98,6 +153,49 @@
          #size-cells = <0>;
          reg = <0x71>;
          reset-gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
+
+        /* Audio_SDA, Audio_SCL */
+        i2c@7 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            reg = <7>;
+
+            pcm3168a: audio-codec@44 {
+                #sound-dai-cells = <0>;
+                compatible = "ti,pcm3168a";
+                reg = <0x44>;
+                clocks = <&clksndsel>;
+                clock-names = "scki";
+
+                VDD1-supply    = <&snd_3p3v>;
+                VDD2-supply    = <&snd_3p3v>;
+                VCCAD1-supply    = <&snd_vcc5v>;
+                VCCAD2-supply    = <&snd_vcc5v>;
+                VCCDA1-supply    = <&snd_vcc5v>;
+                VCCDA2-supply    = <&snd_vcc5v>;
+
+                ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    port@0 {
+                        reg = <0>;
+                        pcm3168a_endpoint_p: endpoint {
+                            remote-endpoint = <&rsnd_endpoint2>;
+                            clocks = <&clksndsel>;
+                            mclk-fs = <512>;
+                        };
+                    };
+                    port@1 {
+                        reg = <1>;
+                        pcm3168a_endpoint_c: endpoint {
+                            remote-endpoint = <&rsnd_endpoint3>;
+                            clocks = <&clksndsel>;
+                            mclk-fs = <512>;
+                        };
+                    };
+                };
+            };
+        };
      };
  };
  @@ -173,6 +271,11 @@
          groups = "usb0";
          function = "usb0";
      };
+
+    sound_pcm_pins: sound-pcm {
+        groups = "ssi349_ctrl", "ssi3_data", "ssi4_data";
+        function = "ssi";
+    };
  };
    &scif1 {
@@ -193,3 +296,51 @@
  &xhci0 {
      status = "okay";
  };
+
+&sound_card {
+    dais = <&rsnd_port0    /* ak4613 */
+        &rsnd_port1    /* HDMI0  */
+        &rsnd_port2    /* pcm3168a playback */
+        &rsnd_port3    /* pcm3168a capture  */
+        >;
+};
+
+&rcar_sound {
+    pinctrl-0 = <&sound_pins
+             &sound_clk_pins
+             &sound_pcm_pins>;
+
+    ports {
+        /* rsnd_port0/1 are on salvator-common */
+        rsnd_port2: port@2 {
+            reg = <2>;
+            rsnd_endpoint2: endpoint {
+                remote-endpoint = <&pcm3168a_endpoint_p>;
+
+                dai-format = "i2s";
+                bitclock-master = <&rsnd_endpoint2>;
+                frame-master = <&rsnd_endpoint2>;
+                dai-tdm-slot-num = <8>;
+
+                playback = <&ssi3>;
+            };
+        };
+        rsnd_port3: port@3 {
+            reg = <3>;
+            rsnd_endpoint3: endpoint {
+                remote-endpoint = <&pcm3168a_endpoint_c>;
+
+                dai-format = "i2s";
+                bitclock-master = <&rsnd_endpoint3>;
+                frame-master = <&rsnd_endpoint3>;
+                dai-tdm-slot-num = <6>;
+
+                capture  = <&ssi4>;
+            };
+        };
+    };
+};
+
+&ssi4 {
+    shared-pin;
+};





[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux