From: Takeshi Kihara <takeshi.kihara.df@xxxxxxxxxxx>
This patch adds PCI express channel 0 device node to the R8A77990 SoC
and enables PCIEC0 PCI express controller on the Ebisu board.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@xxxxxxxxxxx>
Signed-off-by: Marek Vasut <marek.vasut+renesas@xxxxxxxxx>
Cc: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Cc: Simon Horman <horms+renesas@xxxxxxxxxxxx>
Cc: Wolfram Sang <wsa@xxxxxxxxxxxxx>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
Cc: linux-renesas-soc@xxxxxxxxxxxxxxx
Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
To: devicetree@xxxxxxxxxxxxxxx
---
.../arm64/boot/dts/renesas/r8a77990-ebisu.dts | 8 +++++
arch/arm64/boot/dts/renesas/r8a77990.dtsi | 34 +++++++++++++++++++
2 files changed, 42 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
index 447e9831104a..2ef9067616ee 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
@@ -444,6 +444,14 @@
status = "okay";
};
+&pcie_bus_clk {
+ clock-frequency = <100000000>;
+};
+
+&pciec0 {
+ status = "okay";
+};
+
&pfc {
avb_pins: avb {
mux {
diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
index a2524fc138a2..46868dacbeef 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
@@ -85,6 +85,13 @@
clock-frequency = <0>;
};
+ /* External PCIe clock - can be overridden by the board */
+ pcie_bus_clk: pcie_bus {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
pmu_a53 {
compatible = "arm,cortex-a53-pmu";
interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
@@ -1610,6 +1617,33 @@
};
};
+ pciec0: pcie@fe000000 {
+ compatible = "renesas,pcie-r8a77990",
+ "renesas,pcie-rcar-gen3";
+ reg = <0 0xfe000000 0 0x80000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x00 0xff>;
+ device_type = "pci";
+ ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
+ 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
+ 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
+ 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+ /* Map all possible DDR as inbound ranges */
+ dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+ clock-names = "pcie", "pcie_bus";
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 319>;
+ status = "disabled";
+ };
+
prr: chipid@fff00044 {
compatible = "renesas,prr";
reg = <0 0xfff00044 0 4>;
--
2.18.0
