Hi Morimoto-san, On Monday, 12 November 2018 05:09:13 EET Kuninori Morimoto wrote: > Hi Laurent > > >> I noticed Salvator can't boot if .config has CONFIG_COMMON_CLK_VC5. > >> This means, Salvator and ULCB can't use same binary so far for me > >> (= all modules are =y on .config). > >> I'm using previous attached .config + your patch + CONFIG_COMMON_CLK_VC5 > > (snip) > > > I'm afraid I can't reproduce this. I checked out > > renesas-drivers-2018-10-09- v4.19-rc7, applied the fix I've submitted, > > took your configuration, enabled CONFIG_COMMON_CLK_VC5, and my > > Salvator-XS H3 boots fine. > > I'm deeply sorry, it was my fault. > I'm using ES1.x board, but I used XS dtb I've done worse mistakes, and many times, so I can't blame you :-) I'm glad it works now. -- Regards, Laurent Pinchart
