On Thu, Nov 08, 2018 at 11:25:23AM +0000, Fabrizio Castro wrote: > Dear All, > > Who is the best person to take this patch? I believe this one is for Marc. > Thanks, > Fab > > > From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx> > > Sent: 10 September 2018 11:43 > > Subject: [PATCH v2 2/3] dt-bindings: can: rcar_can: Add r8a774a1 support > > > > Document RZ/G2M (r8a774a1) SoC specific bindings. > > > > Signed-off-by: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx> > > Signed-off-by: Chris Paterson <Chris.Paterson2@xxxxxxxxxxx> > > Reviewed-by: Biju Das <biju.das@xxxxxxxxxxxxxx> > > --- > > v1->v2: > > * dropped "renesas,rzg-gen2-can" and fixed "clocks" property description > > as per Geert's comments. > > > > This patch applies on top of next-20180910. > > > > Documentation/devicetree/bindings/net/can/rcar_can.txt | 18 +++++++++++++----- > > 1 file changed, 13 insertions(+), 5 deletions(-) > > > > diff --git a/Documentation/devicetree/bindings/net/can/rcar_can.txt b/Documentation/devicetree/bindings/net/can/rcar_can.txt > > index 94a7f33..f3b160c 100644 > > --- a/Documentation/devicetree/bindings/net/can/rcar_can.txt > > +++ b/Documentation/devicetree/bindings/net/can/rcar_can.txt > > @@ -4,6 +4,7 @@ Renesas R-Car CAN controller Device Tree Bindings > > Required properties: > > - compatible: "renesas,can-r8a7743" if CAN controller is a part of R8A7743 SoC. > > "renesas,can-r8a7745" if CAN controller is a part of R8A7745 SoC. > > + "renesas,can-r8a774a1" if CAN controller is a part of R8A774A1 SoC. > > "renesas,can-r8a7778" if CAN controller is a part of R8A7778 SoC. > > "renesas,can-r8a7779" if CAN controller is a part of R8A7779 SoC. > > "renesas,can-r8a7790" if CAN controller is a part of R8A7790 SoC. > > @@ -16,15 +17,21 @@ Required properties: > > "renesas,rcar-gen1-can" for a generic R-Car Gen1 compatible device. > > "renesas,rcar-gen2-can" for a generic R-Car Gen2 or RZ/G1 > > compatible device. > > - "renesas,rcar-gen3-can" for a generic R-Car Gen3 compatible device. > > + "renesas,rcar-gen3-can" for a generic R-Car Gen3 or RZ/G2 > > + compatible device. > > When compatible with the generic version, nodes must list the > > SoC-specific version corresponding to the platform first > > followed by the generic version. > > > > - reg: physical base address and size of the R-Car CAN register map. > > - interrupts: interrupt specifier for the sole interrupt. > > -- clocks: phandles and clock specifiers for 3 CAN clock inputs. > > -- clock-names: 3 clock input name strings: "clkp1", "clkp2", "can_clk". > > +- clocks: phandles and clock specifiers for 2 CAN clock inputs for RZ/G2 > > + devices. > > + phandles and clock specifiers for 3 CAN clock inputs for every other > > + SoC. > > +- clock-names: 2 clock input name strings for RZ/G2: "clkp1", "can_clk". > > + 3 clock input name strings for every other SoC: "clkp1", "clkp2", > > + "can_clk". > > - pinctrl-0: pin control group to be used for this controller. > > - pinctrl-names: must be "default". > > > > @@ -41,8 +48,9 @@ using the below properties: > > Optional properties: > > - renesas,can-clock-select: R-Car CAN Clock Source Select. Valid values are: > > <0x0> (default) : Peripheral clock (clkp1) > > - <0x1> : Peripheral clock (clkp2) > > - <0x3> : Externally input clock > > + <0x1> : Peripheral clock (clkp2) (not supported by > > + RZ/G2 devices) > > + <0x3> : External input clock > > > > Example > > ------- > > -- > > 2.7.4 > > > > > Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered No. 04586709. >
