[PATCH 0/2] renesas: rcar-gen3: add HS400 quirk for SD clock

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>

Hi Geert,

This is the result of the SDHI hackathon for a possible solution to the 
clock issue on early ES versions. It is based on the Gen2 solution where 
a row of the possible clock settings are ignored on the effected SoC+ES 
versions. The first row is not effected when reading settings left by 
the bootloader, only when the setting the clock.

This is tested on H3 (ES1.0, ES2.0), M3-W (ES1.0) and M3-N together with 
patches to enable HS400 with great results. No regressions found for 
eMMC HS200/HS400 modes nor for SDR{25,50,104} on any of the SoCs.

Patch 1/2 adds documentation on which settings is used while 2/2 is the 
real change where the quirk is implemented.

Niklas Söderlund (2):
  clk: renesas: rcar-gen3: add documentation for SD clocks
  clk: renesas: rcar-gen3: add HS400 quirk for SD clock

 drivers/clk/renesas/rcar-gen3-cpg.c | 38 ++++++++++++++++++++---------
 1 file changed, 27 insertions(+), 11 deletions(-)

-- 
2.19.1




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux