The eMMC card has two supplies, VCC and VCCQ. The VCC supplies the NAND
array and the VCCQ supplies the bus. On this particular board, the VCC is
connected to 3.3V rail, while the VCCQ is connected to 1.8V rail. Adjust
the pinmux to match the bus, which is always operating in 1.8V mode.
Signed-off-by: Marek Vasut <marek.vasut+renesas@xxxxxxxxx>
Cc: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Cc: Simon Horman <horms+renesas@xxxxxxxxxxxx>
Cc: Wolfram Sang <wsa@xxxxxxxxxxxxx>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
Cc: linux-renesas-soc@xxxxxxxxxxxxxxx
---
arch/arm64/boot/dts/renesas/ulcb.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi
index 0ead552d7eae..f2fabead5031 100644
--- a/arch/arm64/boot/dts/renesas/ulcb.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi
@@ -329,7 +329,7 @@
sdhi2_pins: sd2 {
groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds";
function = "sdhi2";
- power-source = <3300>;
+ power-source = <1800>;
};
sdhi2_pins_uhs: sd2_uhs {
--
2.17.1
