DMA needs to be cleaned up not only on timeout, but on all errors where
it has been setup before.
Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
---
Reported and tested by the BSP team.
drivers/i2c/busses/i2c-rcar.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c
index 52cf42b32f0a..4aa7dde876f3 100644
--- a/drivers/i2c/busses/i2c-rcar.c
+++ b/drivers/i2c/busses/i2c-rcar.c
@@ -806,8 +806,12 @@ static int rcar_i2c_master_xfer(struct i2c_adapter *adap,
time_left = wait_event_timeout(priv->wait, priv->flags & ID_DONE,
num * adap->timeout);
- if (!time_left) {
+
+ /* cleanup DMA if it couldn't complete properly due to an error */
+ if (priv->dma_direction != DMA_NONE)
rcar_i2c_cleanup_dma(priv);
+
+ if (!time_left) {
rcar_i2c_init(priv);
ret = -ETIMEDOUT;
} else if (priv->flags & ID_NACK) {
--
2.19.0
