Hello,
On Wednesday, 17 October 2018 20:48:01 EEST Laurent Pinchart wrote:
> The LVDS0 encoder on Koelsh and Porter, and the LVDS1 encoder on Lager,
> are enabled in DT but have no device connected to their output. This
> result in spurious messages being printed to the kernel log such as
>
> rcar-du feb00000.display: no connector for encoder /soc/lvds@feb90000,
> skipping
>
> Fix it by disabling the encoders.
>
> Fixes: 15a1ff30d8f9 ("ARM: dts: r8a7790: Convert to new LVDS DT bindings")
> Fixes: e5c3f4707f39 ("ARM: dts: r8a7791: Convert to new LVDS DT bindings")
> Reported-by: Simon Horman <horms@xxxxxxxxxxxx>
This should have read
Reported-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Sorry for the mistake, I had read the e-mail thread containing the report
incorrectly. Simon, could you fix this when applying to your tree, or should I
send a v2 ?
> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
> ---
> arch/arm/boot/dts/r8a7790-lager.dts | 2 --
> arch/arm/boot/dts/r8a7791-koelsch.dts | 2 --
> arch/arm/boot/dts/r8a7791-porter.dts | 2 --
> 3 files changed, 6 deletions(-)
>
> diff --git a/arch/arm/boot/dts/r8a7790-lager.dts
> b/arch/arm/boot/dts/r8a7790-lager.dts index 50312e752e2f..7b9508e83d46
> 100644
> --- a/arch/arm/boot/dts/r8a7790-lager.dts
> +++ b/arch/arm/boot/dts/r8a7790-lager.dts
> @@ -489,8 +489,6 @@
> };
>
> &lvds1 {
> - status = "okay";
> -
> ports {
> port@1 {
> lvds_connector: endpoint {
> diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts
> b/arch/arm/boot/dts/r8a7791-koelsch.dts index ce22db01fbba..e6580aa0cea3
> 100644
> --- a/arch/arm/boot/dts/r8a7791-koelsch.dts
> +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
> @@ -479,8 +479,6 @@
> };
>
> &lvds0 {
> - status = "okay";
> -
> ports {
> port@1 {
> lvds_connector: endpoint {
> diff --git a/arch/arm/boot/dts/r8a7791-porter.dts
> b/arch/arm/boot/dts/r8a7791-porter.dts index f02036e5de01..fefdf8238bbe
> 100644
> --- a/arch/arm/boot/dts/r8a7791-porter.dts
> +++ b/arch/arm/boot/dts/r8a7791-porter.dts
> @@ -482,8 +482,6 @@
> };
>
> &lvds0 {
> - status = "okay";
> -
> ports {
> port@1 {
> lvds_connector: endpoint {
--
Regards,
Laurent Pinchart
