Re: [PATCH] arm64: dts: renesas: r8a77980: add thermal support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Sergei,

On 2018-10-10 13:47:36 +0300, Sergei Shtylyov wrote:
> On 10/10/2018 11:36 AM, Simon Horman wrote:
> 
> >> Describe THS/CIVM in the R8A77980 device trees.
> >>
> >> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
> >>
> >> ---
> >> This patch is against the 'renesas-devel-20181008-v4.19-rc7' tag of Simon
> >> Horman's 'renesas.git' repo.
> >>
> >> The thermal driver/bindings patches have been just posted...
> >>
> >>  arch/arm64/boot/dts/renesas/r8a77980.dtsi |   38 ++++++++++++++++++++++++++++++
> > 
> > Thanks Sergei, one minor nit from me below.
> > 
> > Niklas, I'd value your review of this patch.
> > 
> >>  1 file changed, 38 insertions(+)
> >>
> >> Index: renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> >> ===================================================================
> >> --- renesas.orig/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> >> +++ renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> >> @@ -330,6 +330,19 @@
> >>  			#power-domain-cells = <1>;
> >>  		};
> >>  
> >> +		thermal: thermal@e6198000 {
> > 
> > "tsc:" would be consistent with other R-Car Gen 3 dtsi that
> > describe this device.
> 
>    There's no consistency even among those: R8A779{5|6}0 use "tsc:", 
> R8A77995 uses "thermal:"... :-)

D3 (R8A77995) uses the Gen2 thermal driver while V3H uses Gen3 thermal 
driver, so there is some consistency and I think we should aim to make 
it as consistent as possible :-)

> 
> [...]
> 
> MBR, Sergei

-- 
Regards,
Niklas Söderlund



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux