Re: [PATCH v6 1/3] dt-bindings: pinctrl: renesas,rzn1-pinctrl: documentation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Sep 27, 2018 at 3:59 PM Phil Edworthy <phil.edworthy@xxxxxxxxxxx> wrote:
> The Renesas RZ/N1 device family PINCTRL node description.
>
> Based on a patch originally written by Michel Pollet at Renesas.
>
> Signed-off-by: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
> Reviewed-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
> ---
> v6:
>  - Instead of combining the pin nr and func into a single element, use
>    a pair of 8-bit elements.

> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.txt

> +- Pin multiplexing sub-nodes:
> +  A pin multiplexing sub-node describes how to configure a set of
> +  (or a single) pin in some desired alternate function mode.
> +  A single sub-node may define several pin configurations.
> +  Please refer to pinctrl-bindings.txt to get to know more on generic
> +  pin properties usage.
> +
> +  The allowed generic formats for a pin multiplexing sub-node are the
> +  following ones:
> +
> +  node-1 {
> +      pinmux = /bits/ 8 <PIN_NR MUX_FUNC>, <PIN_NR MUX_FUNC>, ... ;
> +      GENERIC_PINCONFIG;
> +  };

and

> +  Example:
> +  A serial communication interface with a TX output pin and an RX input pin.
> +
> +  &pinctrl {
> +       pins_uart0: pins_uart0 {
> +               pinmux = /bits/ 8 <
> +                       103 RZN1_FUNC_UART0_I   /* UART0_TXD */
> +                       104 RZN1_FUNC_UART0_I   /* UART0_RXD */
> +               >;
> +       };
> +  };

So the above is in response to Rob's comment on v4:

| > +#define RZN1_MUX(_gpio, _func) \
| > +       (((RZN1_FUNC_##_func) << 8) | (_gpio))
|
| I'm not a fan of token pasting and it also goes against kernel style.
| If every other Renesas platform is doing this, then fine. Otherwise,
| you can express it in pretty much the same (source) space:
|
| pinmux = <RZN1_MUX_UART0_I 104>;
|
| Yes, this is 2 cells instead of 1, but if you care about space, you
| can use 8 or 16 bit size.

I'm not so much impressed by the "/bits/ 8" part.
No other pinctrl bindings uses this.
We do have RZA1_PINMUX() and STM32_PINMUX() macros.

Rob: Is this really what you intended?

Thanks!

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux